Joco776

send it to me, I'll try to upload it there. Thank you

and can i upload this version there? MEN2_EU_SKGPx_P0080L_8755

have this version there and would need to update to a newer version MEN2_EU_SKGPX_P6473L

@pab567Hi Pab, would you please have this sw MEN2_EU_SKGPX_P7381L

@lennshow66 @TK1980 You have a message

@Andrej1986 Hello. I have to find my dates and I will write you at the weekend, I can't do it right now.

@Andrej1986 Yes. In the end I had to figure it out myself, no one here gave me advice🫤

@maelstrm You have a message

@vanflipsen You have a message

@plamen_333No, it doesn't work

@plamen_333 Hello. "The lights in the mirror come on when reversing". For that, he needs to have a 360° camera.

@carsibekir @gerstemann @NitaR @Username_ Hello. Please message me if you want to upgrade to a higher version.

@Trip83, @SpooneR1 I sent you a message

@Gahl If you want an update, I can do it remotely. I've updated it to support virtual cockpit map display and better responsiveness when connecting a mobile phone and to have a new menu look.

@Gahl you have a message

@tim212 Hello. I can also help you remotely with the sw update from 0245 to 0480. It's not just an update. Your mib must be modified to accept the new 0480 sw which cannot be downloaded and updated directly. I can prepare the necessary data you need. Please write to me if you are interested.

Those of you who have lower versions 02xx, 03xx and wanted to upgrade to 04xx, I can update remotely. If so, please pm me. I wish everyone a nice rest of the day.

@Andrej1496

Hello. I have an offer to replace the unit from 5Q0-035-874-C to 3V0-035-044. Will it be necessary to adjust something when they are swapped between each other in the vehicle, both are Superb 3 rv 2016, or will everything go as before plug and play?

@Andrei1496 yes, I have already put everything in order from the backup, and the ambient RGB interior lighting works for me as well.

Hello, I installed the current version on my columbus MHI2_ER_SKG11_K3343_1433 and I expected to be able to display the new menu. Is there any way to do it?

Hello, So I made progress today and finally got the paint on the door trim. I managed to activate it, but with the error that it is not possible to select another color, the program only lights up in red, but only when the door is opened. Brightness adjustment already works on infotaiment. Somehow I managed to block all the rear lights of the vehicle, neither the blinkers nor the lights work, day or night . I am attaching the details of my 09 unit. adpmap-09-5Q0-937-084-AS.CSV adpmap-09-5Q0-937-084-AS.txt

Hello, could any of you please share the 09-adatmap who has the Ambient lighting Superb 3?

@Andrei1496 Thank you, I have already gone through this page. I ran into one problem with the coding. My unit refuses to encode FPA 😞 19 'GW Coding' FPA_Funktion_AMB. Byte11 Bit7 ...enable

Hi group, I'm finishing up the ambient door and dash lighting on my Superb 2016, so far I've run the wire to the BCM purple yellow to C 29, white red to the fuse box to position 14 (because I already have the SC8 position filled with something) and the brown wire I put on the frame of the car on a bolt. I measured the cables and the electricity in it is already: In red and white it is 14.48v. In violet yellow is 13.93v. I would need your help with coding. Enable color selection in the main unit. I tried to code from this guide and it doesn't work, I just get suns without color. https://www.glaskugelservice.de/codierung/ambientbeleuchtung