Joco776

@pab567 is it also possible to activate apple carplay on this unit? 3V0 035 871 C HW: 671 SW: 8395 Bluetooth: C 190 MEN2_EU_SKGPx_P7130L

Is there a version of the original sw 0478 or is it already new. I witnessed the display not responding well to the update and after turning off the vehicle and locking the display the display was still on even though it was turned off. Even removing the battery for 3 hours did not help. Only a new sw update of all items solved it.

@jimbothenav @Halil27 @Alcolique @Saar Hi, send me an email and I will send you the update for your unit.

I am about to upgrade the ambient lighting to the 2021 mib3, hopefully it will be wired to the BCM just like it was before the fl version. Pin 1 > +12V (terminal 30) Pin 2 > LIN (BCM Plug C Pin 29) Pin 4 > Ground Do you have a link to that script?

@mattft86 Hi, does the script also work on mib 3? How many colors does it have? Please send me the link. Thank you.

Hello, is there a difference in connecting the ambiente to the Superb 3 facelift and pre-facelift and in the coding when MIB3 is already there?

Hello, I will be changing the BCM from low to high on the Superb 3, I would need your support. I have odis and vcds. I have these 3 BCMs 5Q0937084DD 5Q0937084CG 5Q0937084AS

@Superbe06 write me

Hi, does anyone have this update MOI3_EU_SK_R8030L MU: 1803

@VenomVrs Hi, send me an email and I will send you the update for your unit.

@steve533 Hi. There are two versions of the update for your unit. The first is just an easy update to 0253. The second is to know how to prepare the data for the old unit and how to prepare the unit itself to receive the new 0480 update. If you are interested, please email me. MST2_EU_SK_ZR_P0253T (MU: 0253) MST2_EU_SK_ZR_P0480T (MU: 0480)

MST2_EU_VW_P0883D (MU: 0883)

You did a good job.

@Simonsifi Hi what station do you need region of the state

@lellek Hi, send me an email and I will send you the update

Update instructions. You can use an empty ŠKODA SD card, your device does not accept other SD cards. And you need to unpack the update and copy everything to the root of the SD card and insert it into the SD1 slot. 1.)Hold the MENU button for 3 seconds. 2.) Click on update. 3.)Start the update - click continue. 4.)The unit will reboot and update will begin. The unit may reboot several times during installation. When finished, the update completion message will appear on the screen and OK will be written in the place where the software changes were made. If you have vcd or obdeleven go to 5F enter security code S12345 OK then in edit look for "confirmation" there you will see 4 numbers you will need to change using the calculator I will send you a link to. https://mib-helper.com/im-so-xory/ There you write the numbers and let new ones be generated and write to vcd or obdeleven with a space and confirm, then the unit tells you to start again (that means the unit reboots). After rebooting, remove all errors from 5f that appear due to the update log and you will never see these errors again because you have successfully verified the new code after installation. (if you don't have vcds or obdeleven, it doesn't matter, you can clear the errors at any time, those errors have no bad effect on your unit or your vehicle) . The engine can be started so that you have enough power in the battery, the engine must not be turned off and the update must not be interrupted, because your unit will get stuck and you will not be able to fix it yourself at home without equipment. Do not worry. Start the vehicle and you can update. I wish you a pleasant entertainment. Regards.

@scex Hi Sent, you will have it in your inbox in 30 minutes.

I'll send it to you tomorrow, I'm not at my computer anymore

@scex Hi, send me an email and I will send you the update for your unit and the update instructions.

@Simonsifi Hi, send me an email and I will send you the update for your unit and the update instructions.

@demanmetdehamer @askee Hello, it's not just an update, it's a transition from 03xx to 04xx, for the unit to accept the sw you have to modify the unit and you have to modify the update itself. Please write to me if you are interested.

@MihaiRo2022 Write me

@aksvnt pm

@pab567 hi can you please send me an update