-
Posts
115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by Dahmich
-
-
On 26/11/2023 at 05:44, numskull said:
C’mon then….im sitting down.🙄
OK....
Bargin for 200 for the outer two lights
110 each for inner two
Center trim in black 174
Various bolts and screws and trim covers.. including some trim from Czech 🇨🇿 approx 100
Obviously doesn't include the time, effort and loom making from Elliott
- 1
-
You can ask....sure.. 🤣
- 1
-
- Popular Post
Modifications time with@ApertureSwhen fitment off the facelift taillights happened
Que loads of photos taken by Elliott
- 4
- 1
- 1
-
-
-
-
On 23/08/2023 at 08:55, Donweather said:
And this rim is close to 10mm closer to the suspension strut so no scrubbing on the inside of the rim (rears) either? Noting you've used 5mm spacers on the fronts I assume no rubbing there?
Also I have no idea but for some strange reason I have more room/offset in the rears to give/play with than compared to the fronts. This is with respect to stock rims. I measure the following 18-20mm from rim to guard on the fronts and 20-22mm on the rears. Perhaps my camber on the rears is more? But I'm not seeing a 5mm more room to move on the fronts over the rears?
And your right, no rubbing on Ny parts, the front 5mm spacers were purely for aesthetic. Although it did help.
-
On 20/08/2023 at 03:55, Donweather said:
Great thanks. Are you on stock springs with DCC? No scrubbing?
Bloody hell, really late reply (my bad)
No, bilstiens and eibachs with slight drop.
-
17 hours ago, rcblur69 said:
Looking at my wheel it is definitely as you’ve shown. If it was the other way around the bag would fit but assume since I have the bag with the larger back it won’t.
How much would your friend be asking? I have seen a few pre facelift bags on eBay for not scary money so that’s always an option.
Pmd you
-
On 18/08/2023 at 20:57, Donweather said:
Can I ask what wheel width and offset your running please? And any spacers? Fitment looks perfect
Running 9j width on the alloys, 255 35 19. They're a 41 offset originally but due to the 9j width the rear didn't need the spacers
The front I've used 5mm spacers as they were in a little, just a slight adjustment needed
-
- Popular Post
- Popular Post
-
Right, I'm thinking of doing the above things are in play but has anyone done it yet or am I going to encounter problems, pcd, center bore and even offset is almost the same (current 44) bentlys 41
So current setup
235x40x19 8j width with spacers 12mm front and rear15mm with longer bolts to match
Proposed setup
245x40x19 9xwidth
Is it going to be tight etc? 🤔
-
-
After following @MartiniB and @ApertureS advice, managed to update thanks guys
also, this was using a 64gb mem card formated to exFat. So all seems ok at present
- 1
-
Be tryng this as soon as I source an sd card lmao
-
- Popular Post
- Popular Post
-
On 26/05/2023 at 10:14, MartiniB said:
+1
for Bilstein B6 DampTronic
+2
-
Yep... deffo columbus 👌
-
-
I've bought a few things off there, only thing you really have to factor in are import fees and tax.
-
So ideally I need the battery bag too. ...
-
1 hour ago, JR RS said:
Yup, that's the one.
I sourced mine from AliExpress, including the battery cover.
AU $13.81 34%OFF | Battery Pool Protective Cover Box Interior Modification Positive And Negative Pole Dust Cover For Skoda Kodiaq Octavia Vw Tiguan
https://a.aliexpress.com/_mPrjI08AU $88.11 | STYO Car EA888 engine hatch cover/Engine dust shield cover For PASSAT B8 2.0T GOLF 7 2.0T TIGUAN 2.0T Superb 2.0T KODIAQ
https://a.aliexpress.com/_mOkXXS8
Cheers bud...out of curiosity does the battery cover just sit on top, I haven't got anything else for it to clip onto as mine is bare 😳
-
2 hours ago, MartiniB said:
my previous 2016. CHHB 162 kW got extra
1. extra rubber sealing around perimeter (Ali)
2. Oil Filler Cap Extender 06K 103 281 A (OE)
3. Washer Tank Cover 6V0 955 485 (Ali)
Cheers for the oil filler cap extender... 👌
-
This any good??Lower engine cover
Drivers door handle - Issue
in Skoda Superb Mk III (2015 - 2023)
Posted
Was this solved after and how did you do it... ? Having similar issues.