Dahmich

Was this solved after and how did you do it... ? Having similar issues.

OK.... Bargin for 200 for the outer two lights 110 each for inner two Center trim in black 174 Various bolts and screws and trim covers.. including some trim from Czech 🇨🇿 approx 100 Obviously doesn't include the time, effort and loom making from Elliott

You can ask....sure.. 🤣

Modifications time with@ApertureSwhen fitment off the facelift taillights happened Que loads of photos taken by Elliott received_6843981992383132.mp4 20231118_193020.mp4

Procured some uber rare rad48 dr1s Currently being refurbished.... Really looking forward to these when done!

Bentley alloys went on...running 255/35/19, 5mm spacers on front and nothing on the rear..

And we go again..... So afew more things to update on.... Engine bay

And your right, no rubbing on Ny parts, the front 5mm spacers were purely for aesthetic. Although it did help.

Bloody hell, really late reply (my bad) No, bilstiens and eibachs with slight drop.

Pmd you

Running 9j width on the alloys, 255 35 19. They're a 41 offset originally but due to the 9j width the rear didn't need the spacers The front I've used 5mm spacers as they were in a little, just a slight adjustment needed

Something a bit different... Red Mk3 l&k on bentley gtc alloys in stealth copper

Right, I'm thinking of doing the above things are in play but has anyone done it yet or am I going to encounter problems, pcd, center bore and even offset is almost the same (current 44) bentlys 41 So current setup 235x40x19 8j width with spacers 12mm front and rear15mm with longer bolts to match Proposed setup 245x40x19 9xwidth Is it going to be tight etc? 🤔

I think the oe part nos are 5Q0505323D 5Q0505323C, these napa ones were bought for mine, but accidently doubled up, just forgot to return them! 40 posted

After following @MartiniB and @ApertureS advice, managed to update thanks guys also, this was using a 64gb mem card formated to exFat. So all seems ok at present

Be tryng this as soon as I source an sd card lmao

Kinda feel like I should add to this now..

+2

Yep... deffo columbus 👌

Evening all, I went looking to see what satnav maps I was running to see if I could look at potential updates. I believe I'm running the admunson system and look like it had an update in 2019, but It looks like it hasn't an sd card, what are my options considering a lack of PC at present

I've bought a few things off there, only thing you really have to factor in are import fees and tax.

So ideally I need the battery bag too. ...

Cheers bud...out of curiosity does the battery cover just sit on top, I haven't got anything else for it to clip onto as mine is bare 😳

Cheers for the oil filler cap extender... 👌

This any good??Lower engine cover