raz2
-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by raz2
-
-
-
some time ago i posted a thread about climatornic pinout as it wouldnt turn on no matter what. anyways i took the car to a mechanic said he climatronic is broken replaced and still same issue. it does turn on but fan dosent work ac dosent work almost nothing works. code is 5J0 907 044 C. Im wondering if someone has a wiring diagram for power and fan and other things.
also i found a pinout on a site but its for older climatronic with three plugs the plugs on mine has only two plugs C and B
-
-
Just now, Breezy_Pete said:
Tomorrow I will fin the wiring loom I made to connect bsg and cluster (but not ECU) and diagnostic socket/kkl obd pug
yes i managed t odo that but i also want to connect the ecu
-
Just now, Breezy_Pete said:
Download the wiring diagram, it will help.
i did but i didint find anything
-
a
Just now, raz2 said:alos
so there is alos this cna bus on ecu( i think this might connecxtx to cluster) . And the pins at bsg for cluster are 2 and 5
-
Just now, raz2 said:
yeah but when i connect thenm like that the cluster fraks out
-
Just now, Breezy_Pete said:
I don't think so. Both images above show 3 = drive canl, 5=drive canh.
yeah but when i connect thenm like that the cluster fraks out
-
Just now, Breezy_Pete said:
So you have bsg pin 16a/3 connected go ecu pin 58, and bsg T16a/5 to ecu pin 60?
no i have pins 2 and 3 that go to the ecu. THats the can bus for ecu
-
Just now, Breezy_Pete said:
Why 2 & 3? CAN low to diagnostic socket and CAN low to drive bus?
no i want it to connect to cluster. First it need to go thru can gateway that is integrated in bsg unnit above clutch pedal then from the unit in goes in the cluster
Just now, Breezy_Pete said:Do you have terminal 15 connection on T18a pin12?
BSG unit will not wake up without.
yes i have the wake up pin connected
the can for cluster is working but for tyhe ecu is dead for some reason
-
Just now, Breezy_Pete said:
T16a pins 3 and 5?
okay so when i connect the pins to the pins on the 2 and 3 pins on bsg nothing happenes ( and on those pins on the bsg there is no voltage) any idea?
shoould be can bus voltage
-
Just now, Breezy_Pete said:
right now im trying to connnect the ecu to the gateway
-
i know them already
-
yes but i already figured iut the other one. Also i want to connect the ecu to the unit but the ecu has 3 can busses and i yhink i need the power train can but i dont have the pin (if it helps its a magneti mareli 036 906 034 BL )
-
-
thanks a lot. I already connected it to the cluster and powered it up but thats all i could do since there is little to nothing information on that unit(even a full pinout will help if you have one)
-
so basically i mean the unit above the clutch pedal yes and i want to try to conenct to it using vcds ( i only have the module on bench) and im asking if i need can bus to connect to it or k-line if yes what pin would it be
-
i want to connect to the bsg unit using vcds but i dont know if i need k-line or can bus. Also i want to connect the ecu to the bsg that has the integrated can gateway but the can bus wires for the gateway are dead, i cheked them with a multimeter and theyre 0 volt(im wonderig if there are other power pins for the gateway)
-
i dont think it shows the ecu
-
im looking to connect some senzors and the throttle to have some fun with the ecu
-
i cant seem to find the wire for the fuel volume, in another post a made some time ago i saw that the fuel and speedo is sent via analog. The serial thing is 6Y1 919 880 C B41
-
5 hours ago, Breezy_Pete said:
Does the engine coolant shortage warning work? (unplug it to check).
They share an earth connection.
yes
-
it was an elegance vejicle so it had this function
-
i know th ewire of the light but i dont seem to get it to trigger
Problem with comfort can bus
in Skoda Fabia Mk II (2007-2014)
Posted
i had the instrument cluster removed on a skoda fabia 2 2010 and now i have a comfort can bus lost communication error in the can gateway and whe nthe ignition is tuned off nothig works on the instrument cluster