okmate

Appreciate that pete, don't rush I'm out for a few hours 2, There isn't 2 camshaft sensors are there ?

Thanks Pete, just confirmed it's a red p

Hey, I've been mulling about this all night, is there a way to test the wiring harness from the camshaft sensor , think this is the easier of the issues to look at first if it helps reg is AV06 SXW

Oh dear,so maybe it's the timing, is there a way to easily check this ?

Pretty sure it's the single cam thinking about it

Sorry,it is the camshaft top of engine,it is a 1.2htp,I've asked him what colour the letters are so will add that ASAP. Thanks so much

Hi not sure if I'm honest, the code is 16725 Could it be possibly wiring, only done an oil change on it last week,its been fine then started misfiring this morning

Hi, my son experienced a miss fire today the car would only go under 3k revs, the same thing happened a while back and the garage changed a spark plug which fixed the problem so assuming that I told him to get 3 plugs, whilst changing the plugs pulling the ignition plugs off resulted in them literally falling apart so off the the car shop we purchased 3 electronic ignition modules, we started the car up and new that this wasn't the problem, I plugged in delphi scanner and seen the crankshaft sensor code, we purchased one and fitted but still the same, it was a rush but all parts were needed anyway, I'm thinking now it could be the harness to the crankshaft sensor, would anyone know how I can test this ? Sorry about the long winded post. Skoda fabia mk1 2006 1.2

Thanks pal really appreciate this

Can any one confirm this,i realise its sunday but i'm eager to get this crossed of my list of things to do lol

So if I'm right i can change pin number 4 and 7 round on the oem connector and all should be ok ?? at the moment the head unit is working but it doesn't retain its memory so believe the main supply from the battery isnt connected to the correct pin,just checking your superior knowledge before i give it a go later

thanks nige8021, the oem conection pushes straight into my double din,, is it easy to remove the cable pins and re configure?

thanks Nige so the wire you mention should go to 1 of the pins on the back of my double din stereo ive attached a draing, does this make sense to you ?

Hi chaps ive successfully installed the stereo and active subwoofer, however i now have an issue that ive noticed that the stereo loses its memory, this explains the wire that was very badly fitted to the wrong size of the fuse box when we purchased the car this was removed straight away as it was dangerous cant understand how the 2 factory fitted radio plugs haven't got a permeant feed to the radio so really need to get my head round this

whats the grey white wire do?

Hi guys its been a while but god its been busy,my son has just past his test so were upgrading the stereo and active sub the weekend. we have a Kenwood DMX 120 BT to install but i can seem to find a remote cable on the back,i'm guessing i will piggy back of the main loom wiring harness for the radio and run it to the rear sub along with a cable directly from the battery, I'm assuming there should be somewhere in the boot i can access a good earth point. Any other ideas ?

ok thanks pal, the key opens the central locking already so will try simpsons

£15 delivery for a £1.52 part surely theres a uk shop

I purchased the new key from ebay it unlocks all the doors perfectly but doesn't start the car,the rfid chip transponder is inserted within the key,do i need to program this now? heres a website ive found is this correct > https://www.programyourkeys.com/Program_Car_Keys_-_Skoda.html

No sure what you mean its brand new, whats the options ?

Hi guys ive purchased a new car key for my sons car as it only had the one key with the fob integrated, the key came with a small glass item that fits in the key, the key opens the driver door great but obviously it dont start the car, is there a way that it can be programmed??

Hey guys I was looking at buying the small lever but cant find a place to purchase from, where do you guys purchase your parts from ??

Well guys after a loveley holiday to cypruss i was back out to fit the new lock,it was a bit of a mare trying to understand where the lock rod was fitted but after several times fitting the door plate back and forth i sussed it in the end,i tested it several times before actually closing the door and it works great,i just need to order the door card plastic connectors before fitting thanks again guys on to the next job

Well i had a look at the part and the new part does have a cut out in the top part so all the tension is on the small bit of steel when the handle is operated seems its a common problem so will add cable ties instead of forking out £30, tight arse i know

Oh forgot to mention,dont suppose you know what part number this would be ? it was held on by cable ties,cant seem to find the part as it wont highlight the number 4 any ideas https://skoda.7zap.com/en/cz/fabia/fab/2006-453/8/837-837000/