Enjay111

When I first got my 2014 rapid back in July 2023 I could connect to the ccm no problem, did all the tear drop wipers, changedn the one touch indicators to 4 flashes etc. But recently I wanted to see if it was possible to have power to the windows for 10-15 minutes after switching the ignition off like every other vw based car I've owned over the years. Anyway, it just will not connect, I'm using the hex v2 can with full up to date vcds. I can connect to everything else as normal. Is there a trick to reset the can bus or that maybe? Or some other trick to try? Used to work on the mk4 golfs, just enter the same coding and got things working. I tried pulling fuse 20 or 24? Can't remember but according to Mr Google it was the fuse for the ccm. Pulling fuse 14 has also cured mysteries on the mk4 golf so thought it could be worth a try. Basically I'm looking for other options other than disconnecting the battery lol. Ps everythng related to the ccm works fine, windows, mirrors etc. Cheers

Hey all, been a vw based car driver for a number of years now, seat, vw etc and have recently aquired a Skoda rapid 1.6tdi elegance. All my queries etc have brought me here every time so thought I ought to join up. Cheers

Not sure if this got resolved but thought I should add my experience, then if someone else is googling it may come up. I had this exact same fault, it was the lower boost pipe had split. Bottom left. It had just perished over time.