richi661

Depending on your SW number, you will need to update according to the following procedure: https://www.drive2.ru/l/650934799095051499/

Here is a link to the workshop manual: https://forum.skodahome.cz/topic/169635-d%C3%ADlensk%C3%A1-p%C5%99%C3%ADru%C4%8Dka-kamiq/ Depending on the equipment, the lighting is equipped with bulbs or LEDs. In some lighting variants, the light source cannot be replaced.

My battery was recharged at the service center at the beginning of July. Today it was found that the error persists. So, I will have to replace the backup battery in the unit. The battery has the number 3G0 915 089.

@nta16 The solution, according to the workshop manual and today's words from a technician at a Škoda car service, is this: With the ignition on, let the vehicle battery charge for two hours.

nta16 accurate description. In Scala located above the fuses.

This is a backup battery in the OCU unit. According to the workshop manual, the main battery should be charged for about two hours with the ignition on. Then run the diagnostics again and if the error persists, replace the battery in the OCU unit.

Hi, here's some coding on Scala and Kamiq from the Škodahome forum. Komplet scala kódování VCDS Zipro-Keras.doc

Here's something about coding https://forum.skodahome.cz/topic/146900-scala-k%C3%B3dov%C3%A1n%C3%AD/

The labels are no longer attached. Previously, the numbers could be found in ERwin. Today, only through a Škoda service or a spare parts dealer with access to the original catalog.

Hello. Is there anyone here who can provide a complete dataset and coding for parking assistant.

Hello. Is there anyone here who could provide a complete dataset and coding for the KA2 parking camera?

Replacement would be possible. The electrical installation connection is the same for Swing and Bolero. Then it is necessary to remove the component protection in a service center or with someone who can do it.

Hello, there is no cabling ready. It would have to be completed.