z klasse

So I found the springs I am looking for. E10790100222 is the set for 20mm front and 10mm rear. https://www.eibach-shop.com/eibach-springs-skoda-octavia-combi-5e5-2.0-tsi-rs-2.0-tdi-rs-p-422868.html?number=E10790100222 This matches the axle load as well. Hopefully should work well with the Bilstein B6 and bring down the height to a better level to avoid the front end going off..

Thank you brother. Will do my research.

Yes I am searching for this. Eibach are also popular. Any idea what’s the drop in eibach and part number? Appreciate the inputs that you have given.

Ok so now I am on a bilstein set up but I am removing the spring and I want to go with H&R but not the 30 or 40mm drop. Do you have the part number for the 20 - 25mm OE Sport Spring?

Part number for OEM Front Shock: 5Q0413031LH Front Spring: 5Q0411105GK Rear Shock: 5Q0513029ND Rear Spring: 5Q0511115D

Automatic gear box. Bilstein B3 Springs are the same as Euro Springs that came in the EU octavia. Here is a pic for comparison.. OEM (india) Vs B3 (new one)

Hi The car came with a rough road package and the car came with 15mm lower set up. That is out of the car as of now. I am on Bilstein B6 + B3 (also known as Euro spring) and even though the spring is shorter than the OEM in the front and the back, the car still feels a bit high at the front and does feel a bit nervous around corners. B6 with H&R with 20mm drop seems to be a good solution.

So we had the 230ps facelift sold to us in 2017 in India and then the 245ps came out after 2 years. The 310 brake was in the 245. we had the 270mm brake. Either way I assume the part number for the 230 and the 245 lowering spring will be the same for the MQB chassis correct?

What is the part number for this Spring? I have the MK3 Hatch 2017 model Face Lift with the Twin headlights 230hp. I am looking at the OE Sport Spring with my current B6 shocks. Drop is suppose to be 0.75in or 19-20mm.

I meant I wanted the H&R Part number for the OE Sport Spring which has 0.75 inch drop. Not sure if its the same part as the Golf MK7 which is 54787-55

Does any have have the part number for the OE Sport spring for the MK3 VRS? I am on B6 shocks and B3 springs but I find the ride height a bit too tall. I want to drop it a bit further. OE Sport Spring is 0.75in all 4's so was wondering if its the same part as the Golf MK7 as here https://www.ecstuning.com/b-h-and-r-parts/oe-sport-spring-set/54787-55~hr/ Car stance with B6 + B3 attached.

its a piece of cardboard from an Ikea box that I bent into a U shape and stuck this magnet. It holds an iPhone 8 Plus which is heavy in the first place along with a cover. Never falls off. You can use any cardboard and put double sided 3M tape underneath it and hold it with these clamps so it sticks well. Doesn’t damage the plastic as well incase you remove it.

It’s a spoiler lip extension from Superskoda

Hi The drone isnt there as such unless you have load and are in the wrong gear. I did not try out many resonated ones.. I just heard them and preferred non resonated. Dont have any issue with any sort of drone. Maybe it will settle in a while.

Wondering if this will hold the width of the iPhone 8 plus in the same location as you have installed. Also are the magnets strong enough to hold? I have installed a temp one like this picture below.. Holds perfectly.. Downside is if a passenger is there then they keep kneeing the phone. Any issues since you have installed this?

Hi the file that creates the RTA etc is tuned by Rammie specifically for my set up and he has tuned the EQ as well after a lot of hard work. I would suggest you contact him and pay him his charges for it. It’s something that would be unfair to distribute for someone else’s hard work and efforts. Hope you understand. All the best.

No picture of the harness.. Its a direct plug and play but the wires have to be spliced and tapped into of the harness. You can speak to the number provided.

No hiss or any issue as such. Its not a direct plug and play. The direct fit harness has to be spliced (not the car one) and then fitted. There is no warranty issues in this as none of the wires of the original car are being spliced. See the thread where I have posted the pictures. They cannot void warranty for this as no wires have been spliced.

I got my wiring harness and installation done from Rammie Address: A-B,, 58, Saki Vihar Rd, Ganesh Nagar, Marol, Andheri East, Mumbai, Maharashtra 400072 Phone: 098211 34304 What all you are doing is too much of a headache to get average results. Eventually when you go with the better speakers and DSP, the upgrade in the sound stage and overall control of EQ and TA is brilliant. Hope he can help you out.

BBS 17 inch 7.5J ET 45 Himalaya Grey Rims 112x5 with Michelin 225/45/17 Pilot Sport 4 APR Intake Carbon Fiber APR Stage 2 Intake Pipe Carbon Fiber APR Remap Stage 2 APR DSG Stage 2 Software Upgrade APR Turbo Inlet Pipe APR Downpipe APR Silicone Boost Hose Kit APR Intercooler APR Muffler Delete APR Oil Catch Can APR Rear Sway Bar 25.4mm 034 Rear Sway Bar Spherical End Links Supersprint Non Resonated Cat Back Exhaust Ferodo Brake Pads Front (race) Defi Boost Gauge Forge Boost Tap Forge Dog Bone Insert Maxton Rear Diffuser Rear Spoiler Ribbed Add On ECS Tuning Front Steel Braided Brake Lines Extended Paddle Shifters Aluminium Helix E62C.2 & Helix E 6X.2 speakers with Pioneer DEQ-S1000A DSP KW Street Comfortline Coilovers - to be installed next week

Yes I am stage 2 with APR downpipe. I’ve heard with two resonators and it’s so silent that it’s boring. The Non Resonated one is about 25% louder than stock but no drone in the cabin or any harshness.

So most exhausts without the Center resonator will be quite harsh and quite loud. Supersprint on the other hand is very very minimal and sounds very sporty at full throttle also. I was going to stay with Non Resonated for a while but when I heard how soft it was, I decided not to add a resonator and am glad I did not. See the below two videos which show the exhaust when it was relatively new. SuperSprint GoPro : https://youtu.be/ZR1zPvGhg9U SuperSprint Cold Start Up: https://youtu.be/fjPqa1Oqv_8

http://www.superskoda.com/Skoda/OCTAVIA-III/Octavia-III-MEGA-POWER-LED-cargo-trunk-light-KI-R

Also upgraded the reverse bulbs. Brilliant. Stock ones was yellow and got these from ali express. No errors and super bright. Direct replacement. https://s.click.aliexpress.com/e/xF1MvgF

Got these from AliExpress and they are bright. The RS has only one and no errors with direct plug in replacement. https://s.click.aliexpress.com/e/cVASGIF