scots_jon

Thanks Sasha, I think I did that but wasn't sure about the other bytes. The VCDS label file doesn't make a lot of sense to me as it's all abstraction layers. As an aside, I'm very impressed with the quality of the OE camera and processing. It's surprisingly useful, especially with my sticky outy towbar. Cheers, Jon.

Hi, Does anyone have the coding for the 6C rear view camera? I fitted the camera to my manual MY16 Octavia Mk3 Scout and it works mostly. Coding for the MIB2 etc was fine, but I'm not completely clear what the coding should be for the camera itself. Teh image displays and the guidelines move with the wheel. However occasional the camera does not display on selecting reverse, I think it may be related to the parking sensors being triggered before selecting reverse. I see there is a entry in the coding to tell it which gearbox is fitted, so I wonder if it is related to this? Thanks, Jon.

I'm tinkering to do just this, I'm trying to add ACC to my MY16 Octavia Scout. Opinion varies greatly on how easy it will be. In my case the parts are quite cheap as I either had the parts anyway or needed to replace them in any case. It's a very low priority background project for me that I only look at when I have free time. I spent hours messing around just to access the BCM plugs for another reason at the weekend and that has put me of touching the bloody car again for at least a few weeks!

Attached in case anyone else needs them. Print dimensions courtesy of this page Vas-6430.pdf

Hi, Does anyone else have an electronic copy (pdf etc) of the calibration target for the lane assistance front camera please? I can find the rear target but not the front. Thanks, Jon.

I can't work out how to edit posts on this forum, and clearly messed up the above post. Hopefully you can work out what I mean.

Link here to the MIB Solutions pack. : I've just done this myself and activated Carplay/Android auto on my MIB2 Amundsen. If you have the Technosat Amundsen with navigation it can be done with no tools at all, just an SD card and VCDS (Genuine HEX interface required). Took me about 15 minutes of actual work after two evenings or reading the German forum via Google Translate to work out how.! Turned out to be very simple in my case! Link here to the MIB Solutions pack. : https://www.digital-eliteboard.com/threads/mib-firmware-sammelthread.493976/ I've just done this myself and activated Carplay/Android auto on my MIB2 Amundsen. If you have the Technosat Amundsen with navigation it can be done with no tools at all, just an SD card and VCDS (Genuine HEX interface required). Took me about 15 minutes of actual work after two evenings or reading the German forum via Google Translate to work out how.! Turned out to be very simple in my case!

Hi, I have this unit in a MY2016 Scout. I would like to upgrade to the latest official firmware as a first step, and identify the HW manufacturer so I can then patch to add the FEC/SWaP. thank you very much in advance for help! Cheers, Jon.