i have bought a right click remote locking system for my car Rightclick

I went to fit it but for some reason it locks fine, but does not unlock. anyone experienced this before?

you have to wire the lock and unlock wire from this system to the 23-pin plug under the dash/steering wheel. the instructions say the unlock wire is pin 4, a black/blue wire. does anyone know if this is accurate for a octy Mk.1 1999? if it is, im doing something wrong but i have no idea what!!! any help would be awesome. cheers guys

??

Hi, when i fitted my kit mine wouldn't unlock either. I hadn't followed their instruction exactly as i had connected to the lock and open wires from the boot lock. On testing the boot lock switch with my multimeter i noticed in the lock position the white/blue wire showed zero ohms to the chassis as you would expect, but in the unlock position the black/blue wire showed 200 ohms. So i tried connecting a 270 ohm resistor in series with the open wire from the rclick box and it works

Hope this helps

Adrian