HI All

I have done a quick search but could not find the info I wanted. I am having to upgrade my turbo to a PD150 Hybrid as the stndard one is on its way out. so as a result I am getting all the bits I needs, FMIC, Clutch and so on. Most of the pipe work is replaced but the pipe coming from the turbo is left as a standard pipe on the standard connection. Is this going to be ok with the increased power? or is there a replacement i can get. I have had a look but can't seem to fine one anyware.

Thanks everyone.

Philip

"coming" doesn't have an "e" in it !

"coming" doesn't have an "e" in it !

There's no need for a space between the final word of a sentence and the punctuation mark - which in this case is an exclamation mark.

HI All

I have done a quick search but could not find the info I wanted. I am having to upgrade my turbo to a PD150 Hybrid as the stndard one is on its way out. so as a result I am getting all the bits I needs, FMIC, Clutch and so on. Most of the pipe work is replaced but the pipe coming from the turbo is left as a standard pipe on the standard connection. Is this going to be ok with the increased power? or is there a replacement i can get. I have had a look but can't seem to fine one anyware.

Thanks everyone.

Philip

A lot of people have minor problems with boost leaks / popped pipes even with the standard map and turbo. I'd recommend that you search this forum for 'turbo pipework' or 'intercooler pipework' - and you should dig up a whole load of threads about exactly this

There's no need for a space between the final word of a sentence and the punctuation mark - which in this case is an exclamation mark.

but it looks better with the space , and people can recognise the fact that there is one there !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

as i have said I have done a search but didn't find anything that was helpfull.

most people pipes poping off ar from the SMIC I just want to know if people replace this pipe or not, none of the pipe work kits seem to replace it.

I think that the pipework is up to the job but you may need to add to or replace the clips with something a little stronger. I know people (including myself) strengthen the joint by using plastic ties in an arrangement like this:

http://briskoda.net/technical-guides/ive-stopped-my-turbo-hose-popping-off/125441/#post1465761