So I'm well on the way to getting woodiemk2 back to scratch.Gonna give the brakes a bleed so they feel a bit sharper.WHilst I have the weels off, I'm tempted to try swapping on some bmw wheels I have-they're 14" by 6.5j 4x100PCD with a 57.1 centrebore I think the offset is circa 25can anyone advise whether they'd fit?Thanks

So I'm well on the way to getting woodiemk2 back to scratch.Gonna give the brakes a bleed so they feel a bit sharper.WHilst I have the weels off, I'm tempted to try swapping on some bmw wheels I have-they're 14" by 6.5j 4x100PCD with a 57.1 centrebore I think the offset is circa 25can anyone advise whether they'd fit?Thanks

sorry for jumble-cant seem to get posts to space correctly??

the offset it a bit narrow, should be more like 35 or 38 on a felicia, but they should fit ok

Have they been re-bored? Didn't think BMW wheels were 57.1 as std...

That's the bore you need though, so if they are that you'll be fine. On an ET25 they'll stick out further but should still be OK. Test fit one and do a visual check

Steve

if you are re-boring the centre spigot of a wheel on a lathe they need to be a smidge bigger than 57.1mm otherwise it will be an interference fit on the hubs, it's the hub itself that is actually 57.1mm

if you are re-boring the centre spigot of a wheel on a lathe they need to be a smidge bigger than 57.1mm otherwise it will be an interference fit on the hubs, it's the hub itself that is actually 57.1mm

ahh, the very man! thanks for all the info gents-I'll trial fit next week and possibly get a pic up to see whether they should stay...