Skip to content

Blue Bullet Carbon Dash & Door Cards Done

Featured Replies

You can also do the air outlet surrounds, takes a little more time but with the Dinoc it is fairly easy.

Removing the Dinoc is also no problem at all. I removed almost everything before selling the car.

  • Author

Was contemplating doing those as well. Might have a go when i get the new roll as that looks better than i thought and the stuff i have left is for the centre console on the Slingshot :thumbup:

I liked the wrap more than the aluminium colored parts. Gave a warmer appearance. But I was too lazy to do the door and dash strips.....

Not sure whether to do the A6 aluminium parts, still have a roll (2.0m x 60cm) left.... emoticon-0136-giggle.gif

If you like to have the B/C/D pillars done, it can also be done with the Dinoc.

  • Author

If you like to have the B/C/D pillars done, it can also be done with the Dinoc.

STOP IT :rofl:

I was looking at them today and thinking the exact same thing. Might even do the window vents (the ones directly behind the exterior mirrors). I prefer it to the Aluminium look as well. My L&K has black inserts and agree makes the car look a lot better inside imo.

emoticon-0140-rofl.gifemoticon-0140-rofl.gif

A friend of mine drives an orange TTS with the rear spoiler, the diffusor and the roof wrapped in Dinoc.

Looks absolutely stunning.

emoticon-0103-cool.gif

  • Author

Been thinking about the Chrome Grille surround as i have a spare one and also the foglight surrounds.

But not sure about them and don't want to waste the Di-Noc. Might have to get a photoshop done first to see if it would look right.

Would love to get the Bonnet, Roof, Boot & Spolier done but think the wife would have a heart attack (or kill me) for the cost of the wrap :rofl:

Edited by vRSCarl

Was contemplating doing those as well. Might have a go when i get the new roll as that looks better than i thought and the stuff i have left is for the centre console on the Slingshot :thumbup:

As I mentioned earlier, I think you should go for them as well, I don't think I would do the actual vents though, bit to much imho. And not forgetting the gear gater! :thumbup:

Edited by Pagey1255

I really like the carbon on the silver door trims and silver bar dashboard trim

I really like the carbon on the silver door trims and silver bar dashboard trim

:rofl: love your updated signature!!

Edited by Pagey1255

:rofl: love your updated signature!!

Lol i said i would :giggle: it's my first proper mod and i'm dead proud of it :giggle::thumbup:

vRSCarl : Not bad at all, but I think you have to much free time ;-)

Did you took doors panels off to take molding off?

Been thinking about the Chrome Grille surround

Do it next. I've got a spare grille surround too I keep thinking about wrapping, but you can save me the effort just in case it looks cack. :rofl::thumbup: :thumbup:

  • Author

vRSCarl : Not bad at all, but I think you have to much free time ;-)

Did you took doors panels off to take molding off?

I took the passenger door card of but they are held in by plastic rivets which you would have to melt of. So i used a Hairdryer, Scalpel, Spudger and a lot of patience. You could do them all on the actual door as thats what i did with the drivers door

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.