Hi. I know this subject has been killed but im just looking and found my one is leaking in the engine bay.

I have found the one that hangs down right at the back.

But cant locate the pipe it needs to join to...

Any help?

Craig.

Many thanks.

It's between the air box filter and the bulkhead, there is a plastic pipe sticking through the bulkhead which needs to be re-attached to the plastic pipe.

Mine went last week, it's just possible to do it single handed, using a torch locate the pipe connectors and using your L hand you can just re-connect them quite easily.

DB.

Found a pipe and thought it was a bit too tight to get on. Turns out the one coming out of the air box was off so i found that one!

1. Could that loose pipe have been causing anything.

2. Ive got the pipe popping out of the bulk head matting stuff. But cant find where to attach it too "/

Found a pipe and thought it was a bit too tight to get on. Turns out the one coming out of the air box was off so i found that one!

1. Could that loose pipe have been causing anything.

2. Ive got the pipe popping out of the bulk head matting stuff. But cant find where to attach it too "/

Get someone to sit in the car and operate the rear wash wipe, you'll soon see!!!

Get someone to sit in the car and operate the rear wash wipe, you'll soon see!!!

Ive found the leaking one!

But i need to find where it connects to...

Ive put a rag underneath the one ive found, and it was soaked, now i need to find where to connect to...

Found a pipe and thought it was a bit too tight to get on. Turns out the one coming out of the air box was off so i found that one!

1. Could that loose pipe have been causing anything.

2. Ive got the pipe popping out of the bulk head matting stuff. But cant find where to attach it too "/

Have you been watching too many episodes of Blackadder??????

Are you Baldrick in disguise??????

Connect the leaking pipe to the one coming out of the bulkhead!!!!!!!!!!!!

Put your hand further down to the right hand side and you should be able to feel it.. Had the same issue.

I must have been blind.

Found it aha!

I can see why they come unatttached.

Quite an unsturdy joint "/

Thanks for the jokingly support

Quite an unsturdy joint "/

Thanks for the jokingly support

who was joking??

but you're right about the cr@p connections - not at all german like

who was joking??

but you're right about the cr@p connections - not at all german like

Got it done now. Also managed to find the metal clip for the dipped beam bulb... so hopefully its all good now

Thanks