Removing rear bumper - PDC

[VagSlag]

Looking to take my rear bumper off today but I have pdc, how do I go about removing the sensors or can I take the bumper off and disconnect once its off?

[VagSlag]

anyone?

[rk696]

There should be a connectore behind the bumper - Remove the bumper, follow the wiring to the rubber grommet on the back of the car, pull it out and disconnect the connectore inside.

[SP-1]

Not got factory parking sensors, I'm presuming your are?? But one tip.. It says in the manual you need to reomove the black rubbing strip, but you don't. There's 4 bolts under it, but you can get to them from inside the boot.

If you look under the bumper before you remove it, you'll probbly see if there's a connector, or enough slack cable. There's a lot of room under there.

[rk696]

Good tip, SP-1

Skoda do 2 types of sensors - One is the factory fit, and the other is the genuine skoda accessory retrofit kit, which I have.

If you have factory fit, there is a connector on each sensor, if you have the aftermarket one, you have to pull the rubber grommet out and disconnect the cable that way.