hi everyone just need some help pls..i need some videos or guides on proper engine bay cleaning..thanks in advance..

Engine de-greaser, rags, beer, sunday afternoon, hot weather, common sense.

Or you could use a steam cleaner, just be careful around electrics.

I just use some inteior cleaner, works well in engine bays for some reason, leave it to soak in for abit then blast it with pressure washer

If you use a Pressure Washer,you need to protect Electrical Items,such as the Starter,ECU,and Alternator.I would wrap some rag around these items,and not direct the jet directly at them.I would also do it on a hot sunny day ,leave the car as long as possible before starting up.

If you use a Pressure Washer,you need to protect Electrical Items,such as the Starter,ECU,and Alternator.I would wrap some rag around these items,and not direct the jet directly at them.I would also do it on a hot sunny day ,leave the car as long as possible before starting up. I think you might wash off the lubrication on the gear change cables etc.

Edited 17 June, 201115 yr by AndyPandy

I just used an old rag, bucket of warm water and some Back To Black Took me fecking ages though!

I just used an old rag, bucket of warm water and some Back To Black Took me fecking ages though!

love your headlights

any chance of seeing a proper picture?

had any issues during MOT?

Yeah, me too.

Are they done with Laminex, or is it fly-eyes?

This works quite well, sold at halfords.

love your headlights

any chance of seeing a proper picture?

had any issues during MOT?

Cheers

I'll pop a picture up when I get home, no problems with the MOT

It is Fly eyes kit, tried to use Lamin X on my new car but is more harder to apply and Fly Eyes is cheaper

And On my new car

I use...

Unipart traffic film remove, almost neat with an old paint brush.

Wash off with a open ended hose and see where the water wont sit and rework those areas

Spray on Tardis

Wash off

Then dress the engine.