Coding camera in Superb 3T

Hello,

I'm trying to install a tiguan camera into my skoda superb combi, 6 months old. I started this project since I found someone that made this same system work in his superb combi.. It looks that we have different ECU units.

I'm now in the " incorrect software version " stage of the installation. I say "stage" since it looks like a common problem in the vwnavi forum where they have a big thread about this kind of installation. Their solution is to tell the car that is an "offroad" vehicle in the 19-gateway. My problem is, not only that my car is a Skoda one, but that when I try to code the gateway it tells me that it doesn't have any information about my ECU.. I'm using a friends vcds cable with 10.6 vagcom version. Is it possible that in the last version of the software my ECU unit could be supported? if someone could confirm it to me I would buy the rosstech cable right now, since it looks like it's the only possibility to make my camera work.

This is the scan and problems I get:

Thank you very much in advance

Address 6C: Back-up Cam. Labels: 5N0-907-441.clb

Control Module Part Number: 3C0 907 441 HW: 3C0 907 441

Component and/or Version: J772__Rearview 0042

Software Coding: 0000007

Work Shop Code: WSC 98765 666 38704

VCID: DFC9274F77AD

2 Faults Found:

01043 - Control Module; Incorrect Software Version

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 2

Fault Frequency: 1

Reset counter: 183

Time Indication: 0

03006 - Back-up Camera System not calibrated

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 2

Fault Frequency: 1

Reset counter: 183

Time Indication: 0

Saturday,03,March,2012,19:47:28:10074

VCDS Version: Release 10.6.4

Data version: 20110418

-------------------------------------------------------------------------------

Address 19: CAN Gateway (J533) Labels: None

Part No SW: 7N0 907 530 K HW: 1K0 907 951

Component: J533 Gateway H40 1620

Revision: H40 Serial number: 220811F1003152

Coding: 359302

Shop #: WSC 33361 790 00999

VCID: 387B2CD332C3

6 Faults Found:

00474 - Control Module for Immobilizer

004 - No Signal/Communication - Intermittent

Freeze Frame:

Fault Status: 00100100

Fault Priority: 2

Fault Frequency: 1

Reset counter: 226

Mileage: 10474 km

Time Indication: 0

Date: 2005.14.13

Time: 20:56:24

01300 - Control Module for Navigation with CD-Rom (J401)

004 - No Signal/Communication - Intermittent

Freeze Frame:

Fault Status: 00110100

Fault Priority: 2

Fault Frequency: 5

Reset counter: 223

Mileage: 9260 km

Time Indication: 0

Date: 2005.14.03

Time: 14:48:30

01304 - Radio

004 - No Signal/Communication - Intermittent

Freeze Frame:

Fault Status: 00110100

Fault Priority: 2

Fault Frequency: 5

Reset counter: 223

Mileage: 9260 km

Time Indication: 0

Date: 2005.14.03

Time: 14:48:30

01044 - Control Module Incorrectly Coded

000 - - - Intermittent

Freeze Frame:

Fault Status: 00100000

Fault Priority: 1

Fault Frequency: 1

Mileage: 10305 km

Time Indication: 0

Date: 2005.14.12

Time: 19:19:51

02873 - Control Module for Back-Up Camera (J772)

004 - No Signal/Communication - Intermittent

Freeze Frame:

Fault Status: 00110100

Fault Priority: 2

Fault Frequency: 2

Reset counter: 223

Mileage: 10305 km

Time Indication: 0

Date: 2005.14.12

Time: 13:54:43

03272 - Control Module for Audio Interface

004 - No Signal/Communication - Intermittent

Freeze Frame:

Fault Status: 00110100

Fault Priority: 2

Fault Frequency: 4

Reset counter: 223

Mileage: 10305 km

Time Indication: 0

Date: 2005.14.12

Time: 11:32:27