Jump to content

PORSCHE CAPS - NOW POSTED - POSTED - POSTED - POSTED


Lloyd55vrs

Recommended Posts

ok im just doing a update,

1 : if theres anyone missed off the list just let me know asap and i.ll add you on

2 : if ive not sent anyone payment details again very sorry, just give me a shout and i'll sort you out :)

3 : as far as im aware , it seems via etka the caps are the same throughout the vag range ( but im always on the lookout for more proof so just keep you eyes out for any updates i find

4 : im planning on asking mk2 vrs owners and fabia vrs owners at castle coombe to try the octy mk1 oil cap :) ( so next sat will have 100% proof - if not done before , but this leaves abit late so be sure to peek )

5 : Both coolant and oil caps are available on thier own for £20 fully packed and posted ( again recorded )

cheers again guys and thanks for sticking with me and crapness lol :D

Link to comment
Share on other sites

MK1 FABIA VRS CONFIRMED FROM MEMBER WITH BOTH CARS ( CHEERS BILLY )

SAME PART NUMBER AND FIT

ONLY DIFFERENCE I WAS TOLD IS THE FABIA VRS CAP HAS AN EXTENSION ON IT TO BRING IT UP LEVEL WITH THE ENGINE COVER

Link to comment
Share on other sites

Ne probs Lloyd mate,

yea the caps are the same. Fabia boys will know what I meant with the extra bit to bring the cap up to the height of the engine cover.

Actual caps are Identical.

Now get tarting guys ;)

Link to comment
Share on other sites

3PM 1ST OF MAY DEADLINE - ORDER AND PAYMENT

I WILL CONTACT ABOUT PAYMENT AS LIST BUILDS :thumbup:

ORDER LIST

1. bluevrs2 = one pair - PAID

2. Vrs'burks = one pair - PAID

3. Big fergi = one pair - PAID

4. j0hn = one pair

5. Danny p = one pair

6. Babs = one pair

7.Ant-vrs =one pair

8. Lee2009 = one pair

9. markybritt = one pair

10. Matt1chelski = one pair - PAID

11. Eskimo = one pair

12. Harve4544 = one pair - PAID

13. RobClubley = one pair - PAID

14. Dave And Lolli = one pair

15. matti_vrs = one pair

16. clarkey 666 = one pair

Link to comment
Share on other sites

3PM 1ST OF MAY DEADLINE - ORDER AND PAYMENT

I WILL CONTACT ABOUT PAYMENT AS LIST BUILDS

ORDER LIST

1. bluevrs2 = one pair - PAID { mk2 vrs

2. Vrs'burks = one pair - PAID { mk1 furbie vrs

3. Big fergi = one pair - PAID { mk2 octavia 1.4tsi

4. j0hn = one pair { mk2 vrs 2.0tfsi

5. Danny p = one pair { mk1 octy vrs

6. Babs = one pair { mk1 octy vrs

7.Ant-vrs =one pair { mk1 furbie vrs

8. Lee2009 = one pair

9. markybritt = one pair {mk2 octavia vrs 2.0 tfsi

10. Matt1chelski = one pair - PAID { mk1 furbie vrs

11. Eskimo = one pair { mk1 furbie vrs

12. Harve4544 = one pair - PAID { mk1 octy vrs

13. RobClubley = one pair - PAID { mk1 octy vrs

14. Dave And Lolli = one pair { mk1 octy vrs

15. matti_vrs = one pair - PAID { mk1 octy vrs

16. clarkey 666 = one pair { mk1 furbie vrs

Link to comment
Share on other sites

Ok ok

Any mk2 vrs folk

Hold until i confirm something !!!!!

Ive dug so deep ive found a question i need to sort !!!

All other are fine but new octys wait a mo

But fear not.... If theres a ussue i'll see you sorted

But as always im curious and just trying to be 100%

Link to comment
Share on other sites

Update.... It seems theres a few 2.0tfsi caps ive been told....

So.... Im going to forget audi and vw guinea pigs and im going to try and hunt a mk2 vrs 2.0cr and 2.0tfsi :)

No more skoda stand ins

Link to comment
Share on other sites

MK1 OCTAVIA VRS - CONFIRMED

MK1 FABIA VRS - CONFIRMED

MK2 OCTAVIA VRS PETROL - tbc

MK2 OCTAVIA VRS DIESEL - tbc

Im On the case guys

And im planning to list your cars next to your names so i know ive covered all orders

Link to comment
Share on other sites

:( its looking like a fail for the newer tsfi engines

I will contact scott and try bring him in for an update when he has spoke more to the audi guys

I will still try the oill cap at castle coombe just in case

Link to comment
Share on other sites

Evening all,

I had a conversation with 2 A4 B7 owners this afternoon and during the cinema.

It turns out that their 2.0T FSI engine oil caps are a little bit sunken/flush with their rocker cover.

The R8 caps, which they all ready fitted with out any issues made us think these would be ok.

But it turns out that the issue people was having with the R8 caps is what made the R8 cap fit on theses engines.

The hight of the R8 cap.

Chatting to my mate he said the Porsche cap is about 1mm or so away from fitting. when he was trying to fit his he got oil on the rubber, so its very close and he said to get it to fit all you'd need to do it trim down the rocker cover or tapper the edge of the Porsche cap. His words [worse welsh accent]"bit of 100 grit will get that porsche cap fitting in there"[/worse welsh accent].

After a bit more research and chatting, it turns out that any one/engine with a flush (I assume thats the correct wording of it) oil cap to their rocker cover will have this issue but if you're willing to take your time and mod the cap it will fit.

I sent Lloyd two caps (Oil & Coolant) on saturday for him to show and test out at combe. so if you're going and want to test them out, have a chat to Lloyd.

40 of theses caps (80 in total. Thats 40 oil and 40 coolant) has been sent out to the A4, A3 and TT lads and this is the only issue that's come about.

Allot less than the R8 caps.

I hope this is ok for everyone and I'm really really sorry.

I know Lloyd has put allot of effort checking the fitment of these caps (I know he's been in contact enough lol) and I've been trying to get these fitted to as many VAG cars as possible for the Audi boys to avoid this for of issue and wasting people's time.

As before, I'm sorry but if you have any questions please ask and we'll do our best to answer.

I think Lloyd is going to bug his local skoda dealer with a hand full of caps to get testing for you guys. lol

Edited by ScottB5
Link to comment
Share on other sites

I'll shall whore them out at castle coombe if everyone is ok for sat :)

I will also try and see what i can do before too :)

Im planning a visit to my local skoda too for oil cap trials if they let me :D

Link to comment
Share on other sites

Evening all, I had a conversation with 2 A4 B7 owners this afternoon and during the cinema. It turns out that their 2.0T FSI engine oil caps are a little bit sunken/flush with their rocker cover.

I just googled A4 B7 engine and this is what came up:

engine-20tfsi-long-audi.jpg

If this is what they look like then that is nothing like the mk2 octy 2.0 tfsi.

Mine is like this:

engine-20tfsi-trans-skoda.jpg

Does this mean that the caps should be fine with the Mk2 Octy VRS?

I phoned my mate at Skoda and he said the pre facelift and post facelift Mk2 engine cover set up is pretty much the same so should be good for all Mk2's :rofl:

Link to comment
Share on other sites

3PM 1ST OF MAY DEADLINE - ORDER AND PAYMENT

I WILL CONTACT ABOUT PAYMENT AS LIST BUILDS

ORDER LIST

1. bluevrs2 = one pair - PAID { mk2 vrs

2. Vrs'burks = one pair - PAID { mk1 furbie vrs

3. Big fergi = one pair - PAID{ mk2 octavia 1.4tsi

4. j0hn = one pair { mk2 vrs 2.0tfsi

5. Danny p = one pair { mk1 octy vrs

6. Babs = one pair { mk1 octy vrs

7.Ant-vrs =one pair { mk1 furbie vrs

8. Lee2009 = one pair

9. markybritt = one pair {mk2 octavia vrs 2.0 tfsi

10. Matt1chelski = one pair - PAID { mk1 furbie vrs

11. Eskimo = one pair { mk1 furbie vrs

12. Harve4544 = one pair - PAID { mk1 octy vrs

13. RobClubley = one pair - PAID { mk1 octy vrs

14. Dave And Lolli = one pair { mk1 octy vrs

15. matti_vrs = one pair - PAID { mk1 octy vrs

16. clarkey 666 = one pair { mk1 furbie vrs

17. Black..VRS..1.8T + one pair { mk1 octy vrs

Link to comment
Share on other sites

OK........ after going to both the skoda dealers in brsitol i found the total of........... 1 mk2 VRS octy (2.0 cr tdi)

it was a fail im afraid guys :(

it was a 06c 103 485P cap !!!!

THIS CAP DOESNT SEEM TO

SWAP FOR THE PORSCHE CAP OUT THE BOX

It goes in but it doesnt lock into place ?????

I dont know if it can be fiddled with but i want mk2 folk to know before ordering

Looking at them they seem the same apart from different size lugs i think

Hope ive helped guys

06c 103 485P = FAIL ATTEMPTS x 1

I will still keep looking for more tries but at the mo it seems ive hunted down a non fitment :(

#####This try was a diesel ######

Link to comment
Share on other sites

3PM 1ST OF MAY DEADLINE - ORDER AND PAYMENT

I WILL CONTACT ABOUT PAYMENT AS LIST BUILDS

ORDER LIST

1. bluevrs2 = one pair - PAID { mk2 vrs

2. Vrs'burks = one pair - PAID { mk1 furbie vrs

3. Big fergi = one pair - PAID{ mk2 octavia 1.4tsi

4. j0hn = one pair { mk2 vrs 2.0tfsi

5. Danny p = one pair { mk1 octy vrs

6. Babs = one pair { mk1 octy vrs

7.Ant-vrs =one pair { mk1 furbie vrs

8. Lee2009 = one pair

9. markybritt = one pair {mk2 octavia vrs 2.0 tfsi

10. Matt1chelski = one pair - PAID { mk1 furbie vrs

11. Eskimo = one pair { mk1 furbie vrs

12. Harve4544 = one pair - PAID { mk1 octy vrs

13. RobClubley = one pair - PAID { mk1 octy vrs

14. Dave And Lolli = one pair { mk1 octy vrs

15. matti_vrs = one pair - PAID { mk1 octy vrs

16. clarkey 666 = one pair { mk1 furbie vrs

17. Black..VRS..1.8T = one pair { mk1 octy vrs

18. Armstrong21490 = one pair {mk1 furbie vrs

Link to comment
Share on other sites

3PM 1ST OF MAY DEADLINE - ORDER AND PAYMENT

I WILL CONTACT ABOUT PAYMENT AS LIST BUILDS :thumbup:

ORDER LIST

1. bluevrs2 = one pair - PAID { mk2 vrs

2. Vrs'burks = one pair - PAID { mk1 furbie vrs

3. Big fergi = one pair - PAID{ mk2 octavia 1.4tsi

4. j0hn = one pair { mk2 vrs 2.0tfsi

5. Danny p = one pair { mk1 octy vrs

6. Babs = one pair { mk1 octy vrs

7.Ant-vrs =one pair { mk1 furbie vrs

8. Lee2009 = one pair

9. markybritt = one pair {mk2 octavia vrs 2.0 tfsi

10. Matt1chelski = one pair - PAID { mk1 furbie vrs

11. Eskimo = one pair { mk1 furbie vrs

12. Harve4544 = one pair - PAID { mk1 octy vrs

13. RobClubley = one pair - PAID { mk1 octy vrs

14. Dave And Lolli = one pair { mk1 octy vrs

15. matti_vrs = one pair - PAID { mk1 octy vrs

16. clarkey 666 = one pair { mk1 furbie vrs

17. Black..VRS..1.8T = one pair - PAID { mk1 octy vrs

18. Armstrong21490 = one pair {mk1 furbie vrs

Link to comment
Share on other sites

MK2 OCTAVIA VRS UPDATE

PETROL 200BHP FSI ENGINE

ive just ran out in the street after my neighbours son lol

it was a 06c 103 485P cap

the result was

it fitted and clicked in place but offset

e3f57f9c.jpg

hope this help the mk2 guys - or i looked a nutter for nothing :D

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.