I'm looking for a dash cup holder that goes in the slot next to the radio.

What car do the come from? I saw on here it was a polo but further research has said it's actually from another skoda.

Just order from main dealers there made to suit the fabia dash. But there around the £30 mark and if you have an aftermarket hu which sticks proud of the dash it may not open correctly

Odered mine from the dealer 6 months ago lol. Still not arrived, they think they're no longer available

A cheaper alternative as long as you don't mind a bit of Diy

Karl

I had twin lupo cup holders in mine. They looked good and were decent quality.

A cheaper alternative as long as you don't mind a bit of Diy

Karl

Isn't that from a vectra?

I had twin lupo cup holders in mine. They looked good and were decent quality.

Any pics?

Well spotted that man :clap:

Bought for about £10, cut the lower half off then screwed to the console

Karl

Dealers....and was/is a genuine accessory for the MKI Fabia....£35 approx.........I have one fitted....and also the one infront of the gearstick!

This is what i had on my old vrs.

This is what i had on my old vrs.

Oh this looks miles better and for me with my mrs in the car would be much more suitable. Where is it from?

I think it's a lupo one mate?

Alternatively there's universal single din holders about £15 on eBay http://bit.ly/VWmM65

Yeah from a lupo. You got to cut off the side lugs to fit it . Other than that it's a perfect fit

I know it's going to sound lazy lol, but can you link me to the polo one if there is one on eBay please guys.

Does these twin cup holders fit with a standard fabia symphony head unit?

Yeah I'm sure they do

Lupo and polo ones are the same. Universal ones are hard to fit, one guy had to tiger seal it in lol. The vw one is easy to trim to make fit and looks oem once fitted

Sent from my Galaxy S3, not a Crapple!

This is what i had on my old vrs.

is this the same as the bottom bit then you cut the plastic sides off??

http://www.ebay.co.uk/itm/VW-POLO-6N2-TWIN-CUP-HOLDER-99-02-/261161837762?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cce7564c2

I ain't sure mate :S . The slot where my iPod is is included with the 2 holders. It came as one. I got it from TPS ill have to find the part number I'm sure I would of found it from a old thread on here

Ive just had a good look round and my link is a different one! Im after 6X0 857 558A which is the holders and the cubby in black.

Ive just had a good look round and my link is a different one! Im after 6X0 857 558A which is the holders and the cubby in black.

Let me know if you find one Mattie.

well this is the guide i used im pretty sure of it!

http://www.briskoda.net/forums/topic/208154-fitting-pololupo-twin-cup-holders/page__hl__+lupo%20+twin%20+cup%20+holder#entry2465238

Let me know if you find one Mattie.

Ive decided against them now Matt, im going for some different styled gauges that will fit in a little better.

If youre still wanting the cup holder/tray its all one unit at circa £40. Part number from ETKA is 6X0 857 558 A (satin black)

You can also get one with one cup holder and a draw

Sent from my Galaxy S3, not a Crapple!

On 30/12/2012 at 21:40, korban said:

A cheaper alternative as long as you don't mind a bit of Diy

Karl

Does anyone know how to actually screw the vectra cups to the bottom of the dash?

 

Because the whole mechanism is inside and theres no way of screwing straight up