Clutch options

Followers

10 December, 201312 yr

My vrs clutch is slipping at high revs it's only done 55k and only been mapped for about 5k at 180bhp 297lbft is this the cause of problem or could it be down to previous owner brought it with 48k on clock (worried it's my bad driving lol)

I have no plans on taking it past this power and don't wanna waste my money on a or clutch if it's not gunna last so after some opinions

Was looking at the Sachs clutch on darkside developments website at £295 or there abouts

Create an account or sign in to comment

Followers

Go to topic listing

No registered users viewing this page.

Announcements

About BRISKODA

BRISKODA is for the sharing of information on ŠKODA. Founded for all motoring enthusiasts, it's free to join and use. We have members from all over the world.

Our Guidelines.
Search the Site.
Explore the Forums.
Gaze into the Gallery.
Make a date, the Calendar.
Classic, custom or modified car insurance!
Please be respectful when posting.

See all Subscription Plans

Mk4 Estate electric boot
Skoda Octavia Mk4 (2020 > )

Mk4 Estate electric boot

SazW · 19 August, 20223 yr

Hi All, We've got an issue with the electric boot (the version without the virtual pedal). It's a 70 plate that has been owned by us from new. From when it was a few months old, the boot will not open intermittently. It doesn't seem to matter whether it's opened by the button on the boot itself, the button in the driver's door or the button on the key fob. Essentially it can be heard unlock, then makes a loud beeping noise, as if obstructed, then locks itself again. It's been to t
- 19 replies
- 4,363 views
SazW

19 August, 20223 yr

MonkeyBoy2283

19 minutes ago19 min
stage 1 remap
Performance & Tuning Upgrades

stage 1 remap

Whiplash · 21 minutes ago21 min

Hi everyone this has most probably been covered before I'm thinking of getting a stage 1 remap on my 2023 Octavia Vrs petrol . I've been looking it up and some people say I need a DSG tune as well is this true? any help would be grateful.
- 0 replies
- 17 views
Whiplash

21 minutes ago21 min

Whiplash

21 minutes ago21 min
Unable to code STG 09 / BCM and STG 03 / Brakes on Kamiq
Diagnostics & VCDS

Unable to code STG 09 / BCM and STG 03 / Brakes on Kamiq

26DIPP · 45 minutes ago45 min

Hello, I wanted to do some coding on a 2020 Kamiq SEL using ODIS. As the title says I was unable to code 09. I was expecting loads of Adaptations and Plain text / Long coding, but instead this is what I saw with NO options at all. Stg 03 is a similar picture. Is this an issue with ODIS? But I can easily read and code STG 03 and 09 in our SIII. My next thought was, do I want to swap the BCM for a newer or more "advanced". Are BCMs on Kamiq easily interchangeable? The 09 is a BCM A0 Std
- 2 replies
- 24 views
26DIPP

45 minutes ago45 min

26DIPP

27 minutes ago27 min
Slightly loose gear knob
Skoda Octavia Mk4 (2020 > )

Slightly loose gear knob

MonkeyBoy2283 · 40 minutes ago40 min

I have a 2020 manual and I have a slight play with the gear knob at the end (please excuse the euphemism), I am able to twist the knob slightly, its not so loose that it feels like its coming off, but the main stick is not moving at all its just the end, so it’s not the actual gearbox. Is this normal or something that can be tightened, as I can not find a picture of the inside of the Mk4, in the Mk3 it seems to be held in place with a metal clip, so if the Mk4 is made the same way, I’m guessin
- 0 replies
- 11 views
MonkeyBoy2283

40 minutes ago40 min

MonkeyBoy2283

40 minutes ago40 min
Extended crank when cold 2.0tsi GPF
Skoda Superb Mk3 (2015 - 2023)

Extended crank when cold 2.0tsi GPF

UndertheRadar · 1 hour ago1 hr

Adding this for anyone that comes across the same issue. Noticed a slightly extended crank a day or so ago, along with a few seconds worth of poor idle and then ran as normal. Checked for codes, and none showing. Checked plugs when I got home again and all ok. Checked the lpfp count and was at or around 50% at idle. No hesitation or misfires and none detected on scanner. Rail holding pressure within parameters and both lpfp and hpfp showing requested and actual pressures where they should b
- 1 reply
- 22 views
UndertheRadar

1 hour ago1 hr

Evolution13

58 minutes ago58 min

Clutch options

Featured Replies

Create an account or sign in to comment

Recently Browsing 0

About BRISKODA

Available Subscriptions

FREEDOM Lite

FREEDOM

Recent Topics

Mk4 Estate electric boot

stage 1 remap

Unable to code STG 09 / BCM and STG 03 / Brakes on Kamiq

Slightly loose gear knob

Extended crank when cold 2.0tsi GPF

Important Information

Account

Navigation

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)