Hi All

 

I have had some **** running lately which i had put down to a vac/boost leak combined with a dodgy SAI. (was worse on cold starts)

So I disconnected the SAI which made a difference for a while but things got steadily worse again.

further investigation once i found my cable has thrown up  block032 Idle Adaptation -3.0% Partial Adaptation 18% which made me think MAF so measured block 2 at idle and get

 

Marker STAMP  /min  %  ms  g/s STAMP  

0.01 720 16.5 2.04               0.53    

0.3 720 16.5 2.04                 0.58    

0.6 720 16.5 2.04                 0.56    

0.89 720 16.5 2.04               0.53    

1.2 720 16.5 2.04                 0.56  

 

Tried Cleaning it seeing as its fubar anyway and it got worse  (used isoprop as my carb cleaner ran out :p)

 

Marker STAMP  /min  %  ms  g/s  

0.24 760 19.5 2.38               0.14   

0.84 760 18.8 2.38               0.17  

1.45 760 18.8 2.38               0.06

 

 

 

So if anyone has a spare working one PM me as cant afford a new one at the moment

Can swap for Hitachi Bolt Down Coil Packs if you want??

 

Karl

Edited 11 May, 201412 yr by karlbar2k

It's all gone mate !!

 

 

 

I have nothing here anymore.

I might have one around will check tomorrow.

Sent from my XT1032 using Tapatalk

Cheers guys!