2014 yeti elegance 140 trailer retrofit (1K)

[GordonY]

looking for advice with coding of 2014 Yeti elegance FL Outdoor  with towbar prep and EEA63002E4 single electrics and witter detachable flange towbar.

Installation all gone smoothly .Coding carried out as per Ross-Tech retrofit instructions for Yeti 5L....VCDS version 12.12.2.0

Updated Gateway (J533/#19

 

Updated trailer module J345/#69

 

Update to brake electronics J104/#03 not required as MK60EC1 is installed and activation not required

 

Update to engine control module (J623/#01) coding amended for trailer with long coding assist

 

 all ok up to this point

update to parking air (J446/#76 or parking aid (J446/#10) these address not found but J791/#10 is my Yeti address for park assist

 

selected this module

 

selected coding 07

 

selected long code helper

 

no bits indicated for trailer

 

enetred adaption

 

no details for trailer coding

 

can anyone advise where I am going wrong

 

 

trailer lights all working but no trailed indicated on bolero and all rear sensors sounding with ignition on and reverse gear selected

 

log files attached before and after coding attempt

 

thanks for any advice

 

 

 

 

Log-FD14 TDZ-TMBMD75L5E6045201-all coding carried out.txt

Log-FD14 TDZ-TMBMD75L5E6045201-trailer module before coding.txt

[GordonY]

looking for advice with coding of 2014 Yeti elegance FL Outdoor  with towbar prep and EEA63002E4 single electrics and witter detachable flange towbar.

Installation all gone smoothly .Coding carried out as per Ross-Tech retrofit instructions for Yeti 5L....VCDS version 12.12.2.0

Updated Gateway (J533/#19

 

Updated trailer module J345/#69

 

Update to brake electronics J104/#03 not required as MK60EC1 is installed and activation not required

 

Update to engine control module (J623/#01) coding amended for trailer with long coding assist

 

 all ok up to this point

update to parking air (J446/#76 or parking aid (J446/#10) these address not found but J791/#10 is my Yeti address for park assist

 

selected this module

 

selected coding 07

 

selected long code helper

 

no bits indicated for trailer

 

enetred adaption

 

no details for trailer coding

 

can anyone advise where I am going wrong

 

 

trailer lights all working but no trailed indicated on bolero and all rear sensors sounding with ignition on and reverse gear selected

 

log files attached before and after coding attempt

 

thanks for any advice

all now working,with trailer connected image of trailer displayed on bolero with rear sensors disabled.

Solved by downloading vcds beta software,all options for trailer activation in park assist j791#10 are in the beta vesion.....

Gordony