9in et52, will they fit?

[coullstar]

Hi, picking my car up tomorrow and already looking at some wheel to replace 17's. 

 

Local guy has some 9x18in Et52 wheels and I was wondering if this width and offset are okay to fit on a standard preFL Mk2 VRS?

 

I dont think they will as its effectively 20mm less clearance both inner and outer on the wheel.   

[SNH]

It'll be the insides that catch, try

http://willtheyfit.com

[coullstar]

I did, thats where I got the 18mm from.  Was just wondering if anyone has tried before.   

[SNH]

The only that's give you room to play would be Coilovers if not already fitted.

I can't remember the 18" zenith width either 7.5 or 8j with et51 so you won't be far off

[coullstar]

Actually this is the site I used.  http://www.1010tires.com/Tools/Wheel-Offset-Calculator

 

7.5 Et51 I think on standards.  Its on the 17's as its an estate.  Standard suspension.  I dont think it will work.   

[SNH]

What about running a 5-10mm spacer?

[coullstar]

Would the outer edge stick out? Dont really like 5mm on front as that doesnt tend to leave enough hub exposed for the wheel to locate. 

 

I suppose main part of my question is what offset is okay with that width.