Messing around with my O3 and trying Golf 7 tweaks I discovered some stuff. Note that my car is an Octavia III Elegance of November 2013 production with color maxidot and Bolero Infotainment

 

Changing the Maxidot Boot Logo:

 

Controller 17 - Instruments

10 - Adaptation

From the channel list select: Display Depiction

The active one is the Version 1 by default.

From the bottom drop down list you can select respectively:

 

Version 1 - Default Skoda Logo

Version 2 - Alternative Skoda Logo

Version 3 - Skoda VRS Logo

 

To do so on the bolero also:

 

Controller 5F - Information Electr.

07 - Coding

Byte 18

 

By default the Value is 00

Change the value to:

 

00 - Skoda Default

01 - Skoda VRS

02 - Scout

03 - Lauren and Klement

04 - Greenline

 

I suppose that this can also work on Amundsen and Columbus. If someone tries please post the results...

 

I will take some photos of the proccess and the results later...

 

Thanks

I was able to change the logo on the infotainment. But I get a Request out of Range error message when I try it for the MaxiDot

Any pics of the new displays

Any pics of the new displays

I am getting a "Driver Error ". Not sure what to do.

www.briskoda.net Driver Error

 

I am getting a "Driver Error ". Not sure what to do.

www.briskoda.net Driver Error

 

Here are the pics for all the 5 logo options. -> https://www.flickr.com/photos/opalsumer/albums/72157660295137003

1) Skoda Default

2) VRS

3) Scout

4) Lauren and Klement

5) Greenline

Out of interest does anyone have, or can anyone kindly make me the vrs logo (no 2)?

I've been looking everywhere to try and find one for the boot screen of my android unit.

Would greatly appreciate any help.

Sent from my iPhone using Tapatalk

I was able to change the logo on the infotainment. But I get a Request out of Range error message when I try it for the MaxiDot

There is monochrome and colour maxidot - is coding for colour version only?

Hey Guys,

 

so I've managed to change the logo according to the instructions, however I don't know how to see the final result. I know that the radio show the startup logo only in some specific cases, so I'm wondering if there is a way to force it so that it shows up. I tried turning the car on the next day and the radio came up almost instantly without booting logo.

Hold the power button in until the unit turns off then turn on again, this causes a full re-boot and should show the logo.

 

John

Anyone confirmed this on Amundsen system?