Hi everyone

I'm looking to do the change for a quick rack and cast iron wish bones and hubs. I've found a few guides but have a few questions about what else I need to know.

Will my Octavia vrs suspension fit the cast iron hubs? People have been sayin to use the Audi TT drop links are these different to the Octavia ones?

I am getting the hubs an wishbones off a cupra R and the steering rack off an r32 golf will this be ok?? Its only because the r32 rack has just been reconditioned an was cheap that I've got bits off the 2 different cars.

Also do I use the Audi TT track rod ends or can I use the Octavia ones?

Last thing poly bushes or standard?

Anything else I'm missing please advice :-)

Thanks guys

Droplinks are the same,

R32 rack fine, what is on mine,

TT/LCR track rods are a better fit, IIRC VRS ones need a washer,

Prefer Poly bushes myself, if not just fit TT/LCR ones.

Hi mate

Thanks for your reply

Can I also confirm that my brembos will go back all ok too?

Thanks

Daniel

Droplinks are the same,

R32 rack fine, what is on mine,

TT/LCR track rods are a better fit, IIRC VRS ones need a washer,

Prefer Poly bushes myself, if not just fit TT/LCR ones.