Skip to content

Injection Quantity Deviation

Featured Replies


Wondering if Injectors are part of poor running problem. (see other posts for details)

 

My understanding is that  Injection Quantity Deviation should be as close to zero as possible for all but that if one of the cylinders deviates significantly then other cylinders will compensate so that even if there is significant deviation the sum of the four will be very close to zero.

 

What I am not clear about is what is the maximum deviations that could be considered good and what would be an upper limit? I am finding some contradicting info regarding this.

 

I do note that if I sum the four here it comes to -0.02 mg/str (so close to zero)

 

 

 -0.96 mg/str  Injection Quantity Deviation Cyl. 1

  -0.28 mg/str  Injection Quantity Deviation Cyl. 2

  0.78 mg/str  Injection Quantity Deviation Cyl. 3

  0.45 mg/str  Injection Quantity Deviation Cyl. 4

 

So do you think these figures point to Injector problems?

 

Thanks

_________________________________________________________________________________________________________

 


Octavia 2                1.9PD              BXE

 

Sunday,10,April,2016,16:58:01:22827

VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64

VCDS Version: 15.7.4.1 (x64)

Data version: 20160216

www.Ross-Tech.com

 

 

Mileage: 141550km-87955mi   Repair Order: 2

 

 

                Address 01: Engine  

 

16:57:51 Group 011: Charge Pressure Control

  819 /min  Engine Speed (G28)

  1091.4 mbar  Boost Pressure (specified)

  867.0 mbar  Boost Pressure (actual)

  84.0 %  Charge Pressure Control Duty Cycle

 

16:57:51 Group 013: Idle Stabilization (Injection Quantity Deviation)

  -0.96 mg/str  Injection Quantity Deviation Cyl. 1

  -0.28 mg/str  Injection Quantity Deviation Cyl. 2

  0.78 mg/str  Injection Quantity Deviation Cyl. 3

  0.45 mg/str  Injection Quantity Deviation Cyl. 4

 

16:57:51 Group 004: Pump-Jet Valves

  819 /min  Engine Speed (G28)

  0.0 °BTDC  Injection Start (specified)

  7.7°KW  Injection Duration (specified)

  0.5°KW  Torsion Value 

 

Those are all well within the tolerance of +/-2.99mg/str and nothing out of the ordinary from those I've seen in the past.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.