I'm looking for an ignition switched live feed in the engine bay to link to the front sidelight bulbs

got the wiring done so just need to find a feed which is only on with the ignition

Will only be 10 watts so no big current draw

Wiper motor is easy enough if you are handy with a multimeter

Wiper motor is easy enough if you are handy with a multimeter

where is the wiring to this? do i just have to trace it back from the motor connection itself?

Under the plastic cover where the wiper arms come through it. It's on drivers side . Or failing that if it's for some auxiliary lights you could use a voltage sensing relay so they would only work when the engine is running

in the end I decided to just run a wire from the fusebox, across to the passenger footwell and through the washer pipe hole which works great - i did look into the wiper motor but there was very little cable slack to use

 

Thanks for your suggestion