Skip to content

edbostan

Members
  • Joined

  • Last visited

  1. Got car back from oil change and as always after the service engine is as sweet as a nut. You would think that 0W would hit the tensioner quicker but 5W has more body. The consensus is that the tensioner is tired and at maximum adjustment so a replacement chain, tensioner and sprockets.
  2. It's has gone into an independent garage today for oil an filter change. He uses 5W 30W for this engine so looking good
  3. Engine is 86bhp tsi with 75k on clock. It has the revised chain tensioner and 2013 reg. I have owned it since new and dealer serviced. The dealer has changed hands and also oils. Currently it has 0W 30W Castrol Edge. In its lifetime it has had Shell Ultra Helix 0W 30, Castrol Edge 5W 30W all Skoda filled
  4. I read somewhere on the forums how to eradicate chain noise on cold start up. I first noticed the whirring chain noise on cold start up in Austria 2019. Recently I have heard this more regularly especially near oil change time. I tried the recommendation of turning on the ignition key and wait until the fuel pump stops whining. Wait a further 5 seconds and then start the engine. It promptly starts with no chain whirring noise. So far every time.
  5. You have answered my question. Thanks
  6. I have had the pcv replaced by a garage when the original broke around 6 years ago. The current valve appears to be in one piece but replacing it, I thought would be a good idea to prevent future problems. As the stem is barbed will it break if I pulled to remove it or will it slide out of rocker cover?
  7. I did the same with my old shed. The wife's brother-in-law drove a Yeti and now a Scala but every opportunity he offers to drive the Roomster. Even he says I would be mad to sell it.
  8. Coming up to 13 years of ownership from new. The 1.2 tsi Roomie apart from servicing and replacing consumables has only needed an offside headlamp and registration plate bulb. I have had no dash warning lights or any other gremlins. The paint is still in showroom shine and interior showing no signs of wear. I am so reluctant to change it..
  9. I am a stalwart and have a 2013 Roomster SE 1.2tsi which I bought new. This made me join the forum for hints and tips which have proven useful. It's over 10 years since the Roomster ceased production so posts for the Roomster is lessening. Mine still looks and drives like new and the dealer is amazed at its condition inside and out. I am reluctant to change it for the hassle of infotainment screens and buggy software updates. I am thankful in thinking my Roomie is the best vehicle I have owned with only one headlamp and registration plate bulbs the only ones replaced. Viva the Roomster
  10. My alarm sounded one afternoon and I unlocked and locked the car. As a precaution I used a vacuum cleaner and used the brush tool and sucked the vents near the interior light switches. Might have sucked out an insect as no more alarm sounding since
  11. When the technician changes the air filter the lifting off the lid puts leverage on the pipe which connects pcv valve to the manifold. It breaks off. When my roomster was serviced I warned the service manager about this and lo behold it was broken
  12. I have noticed my radiator fan is making a noise especially now with the aircon being used during this hot weather. It has a rumble rather like a washing machine drum spinning. Are the bearings lack lubrication and would a spray of lubricant behind the fan blades quieten it?
  13. That has happened to me three times in 12 years. I just press the middle of each sensor with my thumb. The suspect one is the nearside sensor nearest the kerb. I found the black rubber seal around the sensor was wet and squishy after washing. Did the press check and no further problems.
  14. Sometimes my rattles on cold start up. There is a slight noise from the hydraulic tappets but that is all. Ours is supposedly to have had the improved tensioner. The dealer filled mine with 0W 30W when the spec is 5W 30W so is that of benefit for the chain? Yes, 0W circulates quicker but does it lack body for faster rise in oil pressure which activates the tensioner? When we had the hot spell in the summer the thinness of the oil made the chain make a rubbing sound for a few seconds which worried me. The impending service and oil change eliminated that noise.
  15. Just enjoy it. Mine is 13 years old and has had no issues over the period. Everything still works like new and is now on 72k. My brother-in-law when he owned a Yeti was always asking to drive my Roomster. He has a Scala now.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.