Hi

My n/s xenon headlamp has stopped self leveling, I removed the headlamp & checked to see if the motor had popped off but was OK, so took motor apart & found it had broken, so I have now replaced it with a 2nd hand motor but still doesn't work, o/s is ok, I was going to swap the motors from side to side to see if if I have bought a failed motor or it's a fault somewhere else, before I do this just wondered if anybody else has come across this issue if so what is the fix. Any help will be greatly appreciated.

Cheers

Phil

The levelling control motor is driven by the xenon ballast unit, if you have VCDS you can test the system

Ok thanks for that, I have vag com lite, is it possible to check it using that

If you can select "Output tests" in the modules 29 Left light & 39 Right light then you should be able to test them