Hi everyone I have a 2014 Skoda Yeti Laurin & Kleiment DSG Face Lift Edition that I need some help with.

 

I have followed the previous forums for Skoda Yeti support & programmed some VCDS feature since I have programmed the Digital Display for mph I have lost my cornering headlight features & a few others unfortunately I forgot to save the pre scan so could anyone send me there scan or help me on how I can restore this ? I have my own VCDS with the latest software under options it shows cornering headlight not installed but it gives me 3 options which are not self explanatory.

 

any support given would be appreciated

 

Thanks

Edited 17 March, 20188 yr by Mr_Khan

Post up a full scan of the car as it stands now.

Hi please find attached the main issue I have noticed is previously my lights were enabled under static cornering lights enabled which gives me 3 options however it doesn't indicate which one is correct ?

 

the second issue I have noticed I am no longer able to select vehicle type & manufacture when coding VCDS

 

any support given is appreciated

 

Thanks

 

Log - GF14 WEK.txt

The problem could be down to the hacked version of VCDS you are using.

7 minutes ago, DGW said:

The problem could be down to the hacked version of VCDS you are using.

+1

 

Version 12.12 is 6 years out of date, which is usually an indication that you are using a third party rip-off lead that only works with old VCDS software.

Edited 22 March, 20188 yr by SWBoy

hi I was using an old software, but I have recently acquired a genuine VAG COM lets hope this work to fix the problems

11 hours ago, Mr_Khan said:

hi I was using an old software, but I have recently acquired a genuine VAG COM lets hope this work to fix the problems

Did you buy it from someone who called it VAG-COM?

 

I ask because Ross-Tech changed the name to VCDS (because of IP issues with VW) several years ago.

 

Download the latest version of VCDS software - 18.2.0 - and repost a full scan. 

7 hours ago, SWBoy said:

Did you buy it from someone who called it VAG-COM?

 

I ask because Ross-Tech changed the name to VCDS (because of IP issues with VW) several years ago.

 

About 10 years ago, yet still the pirates insist on calling it Vag Com.

31 minutes ago, Rustynuts said:

yet still the pirates insist on calling it Vag Com.

Precisely why I asked the question ....

 

If it was bought described as VAG-COM then it is most probably a rip-off copy.