Radio Bolero activation (Witout navigation module)

[Joao_Pereira]

Hello guys,

 

I have seen many videos and topics explaining how to activate the rear view camera on Skoda using VCDS but, in all of them i have to use the navigation module.
The problem is, i don´t have a navigation module on my fabia. Is there a way to activate it? 

 

Another thing is, in my radio unit (2015 Bolero) , i don´t have a plug for the rca cable. I read a topic here in this forum and it said that the camera should be connected to the pins 6 and 12 of the blue socket in the radio unit. Should i cut the rca plug and connect it directly?

My camera kit looks like this one:

 

[pab567]

Exact model number and SW version of Bolero unit?

[Joao_Pereira]

I hope this can help:

[Joao_Pereira]

No one has any ideia if it is possible to activate it with this radio unit? 

Edited 29 April, 2018 by Joao_Pereira

[pab567]

Sorry I missed your post. With this unit RVC should be possible  

[Joao_Pereira]

Hi. 

Thank you.

 

Is it necessary to activate with vcds or is it just plug and play?

As i said, i don´t have the navigation module-

[pab567]

You have to code it in both Bolero and PDC controller

[Joao_Pereira]

On 18/05/2018 at 12:05, pab567 said:

You have to code it in both Bolero and PDC controller

Unfortunately i don't have PDC controller either

[pab567]

Based on MIB ST2 PQ units experience I can say it should be possible also to have RVC working without PDC

[Joao_Pereira]

My kit looks like this one:

 

I'm my unit there's no input for the rca cable. Should I cut it to connect  it directly to the pins 6 and 12 of the blue socket? 

[jim0611]

On 18/05/2018 at 12:05, pab567 said:

You have to code it in both Bolero and PDC controller

hello \i have a 2009 skoda octavia mk2 with the bolero head unit without navigation or PDC, I have installed the rvc to pins 6 and 12 please how do I code the vcds

[pab567]

What is your Bolero model number? Because pins 6&12 refer only to MIB units and octavia mk2 didn't have MIB factory installed.

 

If you don't know then post a picture.

[jim0611]

 

28 minutes ago, pab567 said:

What is your Bolero model number? Because pins 6&12 refer only to MIB units and octavia mk2 didn't have MIB factory installed.

 

If you don't know then post a picture.

 

[pab567]

As I expected... this is NOT MIB and it does NOT support RVC at all...

[jim0611]

oh wow thanks a lot.Please  what OEM head unit can i get that support RVC and will fit the stick wire harness