Hello

I have a problem with starting the electric tailgate, after connecting everything and coding I have a flap lock error. The controller does not receive a feedback signal that the damper is open (there is only a signal that it is closed) and the actuators do not want to operate.

The whole set was pulled out of one car using cables in which everything worked 100%, so an electrical problem or bad connection is excluded because it is connected exactly the same as in the factory

Does anyone know where and what exactly do you need to code / adapt so that the car knows there is an electric tailgate?
Skoda Octavia 2019 FL

 

  Maybe someone has coding ADPMAP from VCDS witsh electric tailgate?

autoscan_20190728_2104.txt

Not that I know much about this, but did you change the striker plate as well, the one fitted with a motor for power latch?

 

https://skoda.7zap.com/en/cz/octavia/oct/2016-753/8/827-827020/

 

I exchanged everything including

 

 

most likely there is a problem with the lack of signal No. 2, which is located in the trunk lock.There is no feedback therefore the actuators do not raise / close the gate

Did you ever solve this? I have done this retrofit now and the boot will not power. Controller says hall motor signal error on motor 2. It won’t power open or closed.

 

Thanks so much

@SashaGracey

 

Did you get this fixed? Looking at adding power tailgate to my 2017FL vrs

Edited 25 August, 20223 yr by Antimus

On 25/08/2022 at 14:14, Antimus said:

@SashaGracey

 

Did you get this fixed? Looking at adding power tailgate to my 2017FL vrs

It was most likely a wiring fault would be my guess or a faulty hall sensor in the strut itself.