Hi,

 

this is very new to me!

i have a Skoda Rapid 2016, late built 2015 1.4tdi.

 

My VCDS cant reach my can gateway 6C0 909 901.  I cant get a full autoscan when it gets stuck trying to reach the gateway thru autoscan.
 

can anyone tell me where the gateway is placed in the car?

i cant actually find it :-/

 

when i talk to Skoda spareparts they dont find any part with the partnumber 6C0 909 901.

 

hope you can help me!

 

best regards

Ronnie

Pretty sure it's built into the BCM/Cent Elect module and that 6C0 909 901 is just the software version.

 

As you using a genuine VCDS cable with the latest software?

Hi Langers2k,

I upgraded from an older VCDS-cable to e newer one at the end of March this year.

 

And i been in contact with Andy S at Rosstech regarding this. 
 

First it was a ROD-file problem but now the newer version of cable and software 20.4 just ”spins” when im trying to make a autoscan.

 

I can find the gateway when i do a ”gateway installation list” in autoscan. Attached that file here now.

 

best regards

Ronnie

Log-SKODA RAPID-TMBEF6NH4G4526253-18-06-2020.txt

I'm sure Andy will sort you out, he'll certainly know more than I do.

 

If you take a look at this example scan from another similar Rapid: https://forums.ross-tech.com/showthread.php?8759-skoda-rapid-not-started

 

You can see the Central Electronics and CAN gateway share the same hardware:

Address 09: Cent. Elect. (J519)       Labels: 6R0-937-08x-09.clb
   Part No SW: 6R0 937 087 R    HW: 6R0 937 087 
   Component: BCM PQ25 H+4  H34 0424  
   
Address 19: CAN Gateway (J533)       Labels: 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 087 
   Component: GW-K-CAN TP20 H34 0424 

Pretty sure this is because they are combined in a single unit

Thanks Langers2k!

 

This helps a lot!

 

Do you maybe know if i can load the ROD-file in to the gateway thru Central electric?

 

Many thanks!

Even if the ROD file is missing, the autoscan should still complete. You'll just have labels: None as per this scan: https://forums.ross-tech.com/showthread.php?12797-quot-No-ROD-file-found-quot

 

Feels like it might be a VCDS bug so you may need to wait for them to fix it...

 

There isn't a public beta at the moment so you can't try that 😕

Thanks again Langers2k!

 

i will contact Ross Tech again.

 

BR