Hi,

 

Need to replace rear discs and pads, any recomendations what/where to buy. Original parts terrible, should I be looking at the likes of Brembo? 

 

Thanks.

https://www.briskoda.net/forums/topic/407627-rear-disc-brake-wear/?do=findComment&comment=5417756

 

8 hours ago, kindalen said:

Hi,

 

Need to replace rear discs and pads, any recomendations what/where to buy. Original parts terrible, should I be looking at the likes of Brembo? 

 

Thanks.

I fitted Delphi to mine, bought at local independent motor factor,  not expensive but much better than original!

Brembo make high carbon discs and matching pads, will not rust as much as OEM

Demon tweeks can supply.  You can go on Brembo web for part numbers.

 

Mayoboat

Have fitted both Pagid and Brembo from ECP and both have shown signs of surface rust so would avoid those if that is an issue.

You must use the premium Disc from Brembo and pads.

Edited 14 July, 20205 yr by Mayoboat
spelling

I am fitting a set of these - J hooked and some performance pads - note mine are the 310mm rears for the 280: https://www.vagbremtechnic.com/direct-replacement-j-hooked-or-grooved-discs-click-for-options-drd-go7/