Hi mate. What reversing camera did you order? Do you have a link? Thanks.

Hopefully this works -https://a.aliexpress.com/_mORcqht

 

Camera A was perfect fit for me.

 

I used this thread as a reference - 

 

Hope that helps 😊

Another AliExpress purchase - I may have a slight addiction 😂

 

Flappy paddle extensions 😎

 

Before

 

Paddles - I went with black as I wanted subtle rather than in your face

 

 

End result. Admittedly I've rarely used the steering controls, will see if these encourage me to use them more 🤔

Another little update - drivers foot rest. Not a perfect fit, but for €15 it's good enough 😊

 

One screw in the side, slight wiggling, job done. 2 mins max once I had the right torx bit. 

 

After getting the hump waiting for a bonnet strut kit to arrive from AliExpress (ordered 27th January and should have arrived by March 4th) I went on Amazon last week and ordered the struts and ball bolts which arrived in less than a week. Fitted today which was easy as pie. Should have had an M10 spline bit for the screws in the bonnet but chanced an m8 Allen key which worked perfect. 4 screws out, 4 bolts in, click the struts in place, done 😁

 

6 minutes ago, Combi_Bob said:

After getting the hump waiting for a bonnet strut kit to arrive from AliExpress (ordered 27th January and should have arrived by March 4th) I went on Amazon last week and ordered the struts and ball bolts which arrived in less than a week. Fitted today which was easy as pie. Should have had an M10 spline bit for the screws in the bonnet but chanced an m8 Allen key which worked perfect. 4 screws out, 4 bolts in, click the struts in place, done 😁

 

Your consignment must have been shipped on the proverbial slow boat!  

On 08/03/2021 at 16:50, Combi_Bob said:

Another little update - drivers foot rest. Not a perfect fit, but for €15 it's good enough 😊

 

One screw in the side, slight wiggling, job done. 2 mins max once I had the right torx bit. 

 

I like the footrest - does it require new holes to be drilled?

14 minutes ago, Warrior193 said:

I like the footrest - does it require new holes to be drilled?

Nope. Hole its already in place and lines up with the original. 

17 minutes ago, Warrior193 said:

Your consignment must have been shipped on the proverbial slow boat!  

Indeed. And it'll probably arrive tomorrow now 😂