Hi, just searched for this but didn't find what im looking for so I try with a new topic if it's okay.

 

I have a Skoda Octavia 3 2019 with original canton system and subwoofer.

 

Just wondering if I can disconnect the original subwoofer and connect another better subwoofer with same connection? Lika an active subwoofer or do I need to do something else? 

Found the cables to the original woofer.

 

1. Orange.

2. Yellow

3. Black

4. Green

 

What is what and can I connect another active subwoofer with this cables?

Or can I just change the woofer in the woofer box?

If anyone can answer this instead: Can I use LC2i pro with the 4 cables from the current stock woofer in the trunk to a aftermarket amp? and how to connect then?

i don't know too much about the canton side of things but i don't think you can connect the LC2i to the wires you are talking about. You would be better to take the pre amp line level outputs from the back of the stereo to the LC2i.

Oh, hmm thank you for your answer :)

Need to check how it is from the stereo. As I have Stock amplifier.

I saw a video on youtube who is showing connection but don't know if it is the same? https://youtu.be/pF0GoD7Sa3Y?t=416

Got answer from a Audiotech in Sweden and they told that it works perfectly with the stock subwoofers cables to the LC2i or Pro to a aftermarket amp to aftermarket sub

Edited 27 April, 20215 yr by nakti

Stuck on how to open the canton subwoofer box from the right side in the trunk.

Can anyone help?