Hi guys This as probably been asked many time but it it a straight swap from auq to bam I’m keeping k03s turbo just I have a bam engine with new belt and pump and my auq is ducked it’s it just the case of plugging everything in to the auq set up i will be keeping the 5 speed box in it to sorry if this as been asked before thanks in advance 

Straight swap other then the inlet manifold 

Thanks buddy the inlet on the engine isn’t face the gear box but it is a little different from the auq intake manifold 

i have done this swap before @baz it aint for the faint hearted but of you get stuck ive used youtube as a guid

On 22/05/2021 at 22:00, vicktor1921 said:

i have done this swap before @baz it aint for the faint hearted but of you get stuck ive used youtube as a guid

Nice1 mate it was hard work to do taking me 6 days on my own and on the drive way in the rain 🤣🤣🤣 but it was fun along the way 

17 hours ago, @baz said:

Nice1 mate it was hard work to do taking me 6 days on my own and on the drive way in the rain 🤣🤣🤣 but it was fun along the way 

Might be worth adding a small guide or state any issues you’ve had along the way. Might help someone else who is looking to do it.

11 hours ago, DeanVRS20VT said:

Might be worth adding a small guide or state any issues you’ve had along the way. Might help someone else who is looking to do it.

Well it wasn’t a straight swap 1 engine in and 1 out I had to strip the full engine down and move it to the bam engine in the end I was left with just the block from the auq wiring loot was a little different to some say straight swap but it wasn’t ye I should of taken more pics from start to finish and if I can help any1 along the way with there’s Id be happy to