Hello,

 

Can someone send me this manual.. I need it for some screw torque values...

 

Thanks

On this forum we don't "send" copyrighted materials.

Better ask for the torque values you are interested and somebody might have an answer.

In an old skodas the only critical torque values are head bolts and hub nuts.

All the others you gan get away with good n' tight.

10 hours ago, RicardoM said:

On this forum we don't "send" copyrighted materials.

I never asked to upload the file here.. You can always send a password protected zip file via email, or use some of the free upload sites..

10 hours ago, RicardoM said:

Better ask for the torque values you are interested and somebody might have an answer.

Well, for now, I need just a value for the 18mm screw on the lower engine holder (so-called "telephone") ... On some Czech forum I found that it was 30 Nm + 1/4 turn, but I want to be sure..

 

2 hours ago, Thefeliciahacker said:

In an old skodas the only critical torque values are head bolts and hub nuts.

All the others you gan get away with good n' tight.

I tend to overtight, that's why I want to do everything by the book

11 hours ago, zeka95 said:

I need it for some screw torque values

There are no such things as torque values for screws. There sometimes are for bolts, studs and set screws but those are all. Also, as stated earlier, even if correct the values and presentation in Haynes are copyright.

2 hours ago, zeka95 said:

lower engine holder

the torque mount you mean just make it good n tight i've never stripped bolts by tightening them by feel (except as i said performance critical bolts for whick i use a torque wrench)

12 hours ago, KenONeill said:

There are no such things as torque values for screws. There sometimes are for bolts, studs and set screws but those are all. Also, as stated earlier, even if correct the values and presentation in Haynes are copyright.

Pardon me for not being precise 

 

10 hours ago, Thefeliciahacker said:

the torque mount you mean just make it good n tight i've never stripped bolts by tightening them by feel (except as i said performance critical bolts for whick i use a torque wrench)

It's nice and tight now..

 

Anyway, I have the manual now, so thanks to all of you..