Skip to content

Having problems fitting vrs mk3 estate tow bar

Featured Replies

Hi im having problems getting a tower fitted to my 2014 vrs octavia estate .

I have a wWesfalia tow bar part no 317312  which is the correct one for my year car. I have checked and triple checked.

my mechanic removed bumper and put tow bar inlace but I don't have the pre drilled holes to screw through to the tow bar .

is my mechanic doing something wrong , he was looking to screw strait through from the side into the tow bar . but as I am looking at the tow bar 

im I right in thinking the screws would come through from the other side ? any help guides or photos would be much appreciated .

doesn't have to be from a vrs just from a mk3 octavia.

here is a photo of were it should attach 

c22d0f98-fa0b-40ce-8eee-48bc47da7a1d.JPG

Edited by martinpix

I don't know if this is correct but have a vague recollection that the pre-drilled holes are covered with tape and then sprayed over with underseal and paint at the factory - si they are probably there, just covered up and need to be found...

 

This thread should help:

 

 

Edited by skomaz

skomaz has it right.  The holes are there - just cunningly camouflaged.

The holes are there, shine a torch down the inside and you will see them.

They are hidden by square stickers and covered with the underseal, there are some promising looking patches on your photo. I know they are well hidden, I fitted the OEM bar to my vrs last year.

 

 

image.thumb.png.e7ae2c2a7f7ee85520ca9f61d552468b.png

Edited by simion_levi

Same as all the VAG platform, small stickers are placed over the holes before painting, just need to find them and peel them away. I was stumped at first too :D

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.