Can anyone identify this pneumatic connector type, it's on a Sealey coolant system pressure test kit, they use the same connectors on their Turbo pressure test kit,  I've contacted Sealey and they say they have no idea of what type of connector is fitted which seems a bit odd ?  A Google picture search only came back with a lighthouse !! and searching for "pneumatic quick release couplings" hasn't found anything yet 

 

 

It is the Continental equivalent of the PCL airline fitting, I have loads of them in my spares box as my airlines use PCL connectors so I swap them. I also have several of the couplings

 

All airtools sold in France at the Brico-sheds use them.

This looks to be the same as the ones that I have although I havn't measured them, dose it look the same as yours?

 

 

https://www.continental-industry.com/en/solutions/fluid-handling/industrial-vehicles/chassis-body/couplings-quick-connection/products/product-range/flat-face-quick-connect-plug-in-couplings

I think this is the one you have:

 

https://alltradedirect.co.uk/collections/airline-hoses-couplings/products/euro-air-line-adaptor-high-flow-female-coupling-1-4-bsp

 

The coupling:

 

https://alltradedirect.co.uk/collections/airline-hoses-couplings/products/euro-air-line-high-flow-female-coupling-1-4-bsp-fmthfcf

9 hours ago, J.R. said:

This looks to be the same as the ones that I have although I havn't measured them, dose it look the same as yours?

 

 

https://www.continental-industry.com/en/solutions/fluid-handling/industrial-vehicles/chassis-body/couplings-quick-connection/products/product-range/flat-face-quick-connect-plug-in-couplings

That looks the closest but physically much bigger according to the PDF 

9 hours ago, J.R. said:

I think this is the one you have:

 

https://alltradedirect.co.uk/collections/airline-hoses-couplings/products/euro-air-line-adaptor-high-flow-female-coupling-1-4-bsp

 

The coupling:

 

https://alltradedirect.co.uk/collections/airline-hoses-couplings/products/euro-air-line-high-flow-female-coupling-1-4-bsp-fmthfcf

Those are the standard "Euro" connectors, I have these on my compressor and they don't mate with the unkown fitting  

I have a pressure brake bleeder which uses a similar dry break coupling, my stuff is stored in several locations and I have no idea where it is to check it.

 

What are you trying to achieve?

1 hour ago, J.R. said:

What are you trying to achieve?

 

I want to purchase a couple of replacements if possible to make up some custom adapters, for a non automotive project and still use the Sealey hand pump unit