Right P2015 code is now driving me potty 🤣,, I’m now thinking swirl flap delete ??

couple of questions if I may ask??

do I still need to leave the motor attached but not connected and do I need to keep it plugged in on the loom ??

does the kits come with plugs for to swirl flap holes or are they just left as a hole 🤣

is this the sort of kit I’d need,, I assume the red clips are just to block off where the metal rod goes through to link them together??

and the other plug goes in where the arm is ??

would anything need mapping out 

thanks peeps 

Search on YT and it's likely you'll get a walkthrough.

3 hours ago, MicMac said:

Search on YT and it's likely you'll get a walkthrough.

Had a butchers but can’t seem to find one 🤣

If you buy a kit from Darkside Developments they usually send you detailed instructions with it. Probably too late if you’ve already bought a kit elsewhere. 

55 minutes ago, Golf-Fiend said:

If you buy a kit from Darkside Developments they usually send you detailed instructions with it. Probably too late if you’ve already bought a kit elsewhere. 

No not purchased one yet mate,, but I was looking and have saved Darkside Developments site,, gunna send them a message regarding correct one 

thanks matey. 
the one I’ve seen with them is only £24 plus delivery,, and looks like it’s just a 2 new gasket’s  and a bung for the arm end 

Edited 15 June, 20223 yr by Hardy1812

See if there's anything relevant here:

 

https://www.youtube.com/results?search_query=2.0+tdi+swirl+flaps+delete

4 hours ago, MicMac said:

See if there's anything relevant here:

 

https://www.youtube.com/results?search_query=2.0+tdi+swirl+flaps+delete

Cheers mate,,,

I’ve already purchased one of those aluminium bits and a new motor and fitted them but I still get the P2015 code,, unless I’ve fitted it wrong 🤣🤣