Hello! Can someone help me with a coding to open the trunk (tailgate) using the virtual pedal (with the foot).

Do you have the virtual pedal hardware - specifically the sensor under the rear valance?

Thanks for the reply! I wanted to ask you if I could put such a sensor and what it would look like or a part code?

Yes it can be done. I’ve done it on my own car and a few customer cars.

 

coding wise if fairly straight forward but takes a bit of fiddling - if I remember there’s a pretty good write up about it on the Ross tech forum that covered a similar car and a lot of discussion around it also.

On 03/02/2023 at 00:01, @drian said:

Thanks for the reply! I wanted to ask you if I could put such a sensor and what it would look like or a part code?

 

The sensors (2nd pic) r two long strips that r placed inside the rear diffuser, as shown in the 1st pic.

 

 

Thank you very much for your help!

On 02.02.2023 at 19:19, ApertureS said:

Da se poate face. Am făcut-o pe propria mea mașină și cu câteva mașini ale clienților.

 

codificare înțeleaptă, dacă este destul de simplă, dar necesită puțin lăutărie - dacă îmi amintesc, există o scriere destul de bună despre asta pe forumul de tehnologie Ross care a acoperit o mașină similară și multe discuții în jurul ei.

And could you give me a link to try?

35 minutes ago, JR RS said:

 

The sensors (2nd pic) r two long strips that r placed inside the rear diffuser, as shown in the 1st pic.

 

 

Thank you very much for your help!

On 02.02.2023 at 11:27, PetrolDave said:

Aveți hardware-ul pedalei virtuale - în special senzorul de sub valpa din spate?

Yes, I have both physical sensors, but the command does not work. Can you help me with what the causes would be?

That exhaust system is a thing of beauty…. 😔