Quote

 

Log: 

Chassis Type: AA-VW12 (6N0)
Scan: 01 03 09 15 17 19 25 44 56 61

VIN: XXXXXXXXXXXXXXX    Mileage: 102490km-63684miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000

Address 03: ABS Brakes (J104)       Labels: 1S0-614-517.clb
   Part No SW: 1S0 614 517 E    HW: 1S0 614 517 E
   Component: EBC 460 ESP   H08 0012  
   Serial number: A00771D
   Coding: 31BF24718BB002F98CFA24F9D1A94090590100
   Shop #: WSC 05072 004 1048576
   ASAM Dataset: EV_Brake1ESPMP1TRWVW120 016035
   ROD: EV_Brake1ESPMP1TRWVW120.rod
   VCID: 3169A0C36029531B74-8064

1 Fault Found:
0193 - Door Contact Switch 
          C1076 29 [008] - Signal Implausible
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 2
                    Reset counter: 4
                    Mileage: 102080 km
                    Date: 2023.06.18
                    Time: 12:38:01

                    DTC: 00 00 C1

 

How to fix this error with ABS please? No fault lights on the dash. 

 

Few questions,

 

• Does my car have ABS? 
• Status: OK 0000 it says in the top but Fault is present says in the bottom, Priority says 6, a minor one? 
• Fault frequency says 2 and reset counter says 4. Does that mean in the last 4 times it has been reset, it came up again twice? 
• 0193 Door Contact switch, not sure what it mean or how it is related with ABS. 

 

Any insight would be helpful! 

 

Is the fault not the door switch?

quite unsure. It's listed under the ABS fault then again in the top of the report no error is recorded. 

 

 

Fault priority 6 means something from my googling. Ross-Tech: VCDS Tour - Fault Codes

 

Number	Meaning
0	Undefined by manufacturer.
1	The fault has a strong influence on drivability, immediate stop is required.
2	The fault requires an immediate service appointment.
3	The fault doesn't require an immediate service appointment, but it should be corrected with the next service appointment.
4	The fault recommends an action to be taken, otherwise drivability might be affected.
5	The fault has no influence on drivability.
6	The fault has a long term influence on drivability.
7	The fault has an influence on the comfort functions, but doesn't influence the car's drivability.
8	General Note

Any ABS fault would show a light on the dash panel.

The mag sensor for the door switch may be faulty, or more likely you have poor wiring or contacts to it (bad ground).

1 Fault Found:
0193 - Door Contact Switch 
          C1076 29 [008] - Signal Implausible

the report also says:

03-ABS Brakes -- Status: OK 0000

 

Thanks! 

 

Does the code mean anything in narrowing down to which door? The vehicle has 5 doors including boot. 

Still searching how to fix it. 

Start with all 5 (or 3) doors closed. Open & close one at time and check that the internal overhead light comes on (the light switch needs to be in the 'auto' position.

 

A bad door sensor may occasionally prevent the car from locking when you press the central locking key fob, and you may also see the "door open" light show on the dash. 

 

If you don't see any of these symptoms, just ignore the fault. It may be historic.

Perfect thanks! Will experiment this weekend.