Hi I'm new here. 

My wife  skoda fabia mk2 drivers door window  keeps tilting when it's going down and up .

I have bought a completely new mechanism and motor as the old one didn't work and all the wire was broken. 

How can I stop it from tilting  when I operate it. 

Thanks 

Steve

Have you correctly connected the module directly to the motor? Have you carefully checked the mushroom sensor which is responsible for raising and lowering the windows? Are you able to remove the side to have a look at it possibly, then it will be easier to answer. 

Yes all connected correctly. 

Someone  mentioned about  a rail by the lock inside where the mechanism is  needs adjustment 

And do you have the window lift mechanism well lubricated with it? Maybe in this case you also need to decide to reset the windows in the car? I have encountered situations where even worn seals have caused this problem? There is a screw on the guide that is responsible for setting the height of the glass lift, have you checked it? 

20 minutes ago, MarkWalsh said:

And do you have the window lift mechanism well lubricated with it? Maybe in this case you also need to decide to reset the windows in the car? I have encountered situations where even worn seals have caused this problem? There is a screw on the guide that is responsible for setting the height of the glass lift, have you checked it? 

It's all branded new including  motor and switches