Hi,
When accelerating, the car enters limp mode, loses power and the glow plug icon lights up, I am posting errors and logs at the bottom. I have already replaced the vacuum lines and the N75 valve. What else to check? I also checked the bulb with a syringe and it holds pressure.

Now Logs:

The location of the turbine bulb is 3699.6mA in the lower one and 694mA in the upper one:

I checked this cable by eye and it is good, I also tightened the clamps:

And I replaced these hoses + valve 6 with a new one

\

Please help, what else could be going on 😕

 

 

A check by eye won’t be enough.

 

a smoke test of the car is required to find pin holes, poor connections, one way valve failed, pcv fault, EGR leaks

I also checked the one-way valve. The leak may only be the pipe I marked?

boost pressure sensor, best regards.