Hi, long time reader of the forum but just signed up. I'm retrofitting a number of genuine parts to a T6.1Transporter and need some help with the following issues. I've installed a new TPMS module, all coded etc and only one fault. Apologies in advance for my first post asking for help

 

I've a new TPMS module that needs parameter file uploaded
-------------------------------------------------------------------
Address 65: Tire Pressure (J502) Labels: 3AA-907-273.clb
Part No SW: 5Q0 907 273 D HW: 5Q0 907 273
Component: RDKBERU30 H06 0010
Serial number: 30000000707352
ASAM Dataset: EV_RDKBERU30 006001
ROD: EV_RDKBERU30_VW41.rod
VCID: 363528CC18C9A54AC5F-8062

1 Fault Found:
12652550 - invalid data record
------------------------------------

and I have a HBA Mirror that was originally from a SEAT Alhambra that is coded for PQ not MQB that needs to be recoded

-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844) Labels:| 8S0-857-511.clb
Part No SW: 3G0 857 511 AK HW: 3G0 857 511 AE
Component: FLA H10 0003
Revision: AA001001
Coding: 040401E201000000000000
Shop #: WSC 00020 999 12345
ASAM Dataset: EV_HighBeamAssisAU316 001004
ROD: EV_HighBeamAssisAU316.rod
VCID: 71BFDBD03127C272D0D-8024

Hoping someone can help £££££££ / Beer

Many thanks in advance

Have moved this to our vcds/diagnostics. Bit more travelled than the non skoda projects bit.

 

hopefully a knowledgeable member will be along shortly   

I'm not super far away and I've got ODIS somewhere, I need to dig out the right laptop and make sure it still works.

 

I've done a parameter upload on my TPMS module previously:

Address 65: Tire Pressure (J502)       Labels: 3AA-907-273.clb
   Part No SW: 5Q0 907 273 B    HW: 5Q0 907 273 

 

So I assume the D rev should be a near identical process.

 

As for the HBA mirror, you need to reflash it rather than recode it based on the instructions here: https://www.drive2.ru/l/606426293524771900/

 

It's somewhat more risky but might work

2 hours ago, ColinD said:

Have moved this to our vcds/diagnostics. Bit more travelled than the non skoda projects bit.

 

hopefully a knowledgeable member will be along shortly   

Thank you 

36 minutes ago, langers2k said:

I'm not super far away and I've got ODIS somewhere, I need to dig out the right laptop and make sure it still works.

 

I've done a parameter upload on my TPMS module previously:

Address 65: Tire Pressure (J502)       Labels: 3AA-907-273.clb
   Part No SW: 5Q0 907 273 B    HW: 5Q0 907 273 

 

So I assume the D rev should be a near identical process.

 

As for the HBA mirror, you need to reflash it rather than recode it based on the instructions here: https://www.drive2.ru/l/606426293524771900/

 

It's somewhat more risky but might work

OK, thanks, can you let me know how to contact you for the TPMS. 

 

With the HBA, I'm thinking that I may have to bite the bullet and buy a MQB one and sell the PQ one I have

 

Many thanks, Nick

Drop me a PM

 

Either here or on Ross-tech forums, same username.