Morning guys, looking for some drilled S3 front discs for my Mark II facelift 59 plate if anyone can recommend a good brand and supplier please I would be grateful 👍🏻

8 hours ago, SJO said:

Morning guys, looking for some drilled S3 front discs for my Mark II facelift 59 plate if anyone can recommend a good brand and supplier please I would be grateful 👍🏻

 

Have you considered ATE PowerDisc front brake discs, as shown in the photo below? In my view, they look more high tech than the drilled Brembos. However, I haven't seen ATE PowerDiscs for the rear 310x22mm brake discs...whereas I have seen Brembo drilled rear brake discs in that size.

 

Here's a photo of an ATE PowerDisc 345x30mm front brake disc. It has a minimum wear of 27mm, which is about 36% more wear than the below drilled Brembo front brake disc.

Here's a photo of Brembo 345x30mm drilled front brake disc. The minimum wear is 27.8mm, so you would get over 36% more wear on the ATE front PowerDiscs before they needed replacing.

https://www.autodoc.co.uk/brembo/13801758#brake-disc

 

Edited 10 September, 20241 yr by Carlston