Hello members,

After the change of my PDC unit (Lost park sensors - Skoda Octavia Mk3 (2013 - 2020) - BRISKODA)

I made the changes in the Coding function it seems all good.

But I still have the message "Manoeuvre braking currently unavailable" when I put the ignition.

Here's an autoscan.

As we can see here ;

-------------------------------------------------------------------------------

Address 10: Park/Steer Assist (J446) Labels:| 5Q0-919-294.clb

Part No SW: 5QA 919 294 B HW: 5QA 919 294

Component: PDC 8 KanalH07 0044

Serial number: 000308418018050 Dataset Number: V03935270DP 0001

Coding: 0471055901

Shop #: WSC 01369 210 40505

ASAM Dataset: EV_EPHVA18AU3700000 009035

ROD: EV_EPHVA18AU3700000_009_VW37.rod

VCID: 4B95D22BE2C519CB6E-801E

2 Faults Found:

12658704 - Databus

U1121 00 [009] - Missing Message

[New feature! Extended UDS fault detail is only supported by current gen. interfaces]

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 6

Fault Frequency: 1

Reset counter: 90

Mileage: 226159 km

Date: 2025.04.01

Time: 10:45:35

13639168 - Databus

U1121 00 [009] - Missing Message

[New feature! Extended UDS fault detail is only supported by current gen. interfaces]

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 6

Fault Frequency: 1

Reset counter: 90

Mileage: 226159 km

Date: 2025.04.01

Time: 10:45:35

I've missing message from databus. Did I miss an adaptation or so ?

The new PDC unit came from a 2018 GTI, maybe with rear cam that I don't have on my 5E5 but I didn't see which adaptation I need to do. I'll take a look when I've some time.

Thank you for your help !

autoscan_Log-TMBJG7NE6J0120920-226159km-140528mi.txt

Forgot to tell.

Start stop works fine ( and <2years battery)

I bought a "cheap" eml because my cheap vcds cable can't read the default as spoken above.

I need to configure/code or flash the new ecu to remove the rear cross trafic alert and electric brake.

3 hours ago, Digitql said:

I bought a "cheap" eml because my cheap vcds cable can't read the default as spoken above.

Sounds like your "VCDS cable" isn't a VCDS cable but a clone/rip-off copy.

15 minutes ago, PetrolDave said:

Sounds like your "VCDS cable" isn't a VCDS cable but a clone/rip-off copy.

Yes, I said my cheap vcds cable 🙃

3 hours ago, Digitql said:

Yes, I said my cheap cable 🙃

Corrected that for you 😉

Update (a bit late);

I bought a 5QA919294B on ovoko (twice... The first one was coded for electronic parking brake, I made mistake...) and all is good now.