Hello. I have a Technisat MIB2 5C0 035 680B retrofit in a skoda spaceback 2014, and when I put it in reverse, the camera interface doesn't activate (it's a low camera). The parking sensor interface appears, with a new button that I think is to switch to the camera screen, but I can't press it.

I've activated 5f-long coding-Byte 19-Bit 4.

VPS and VPS_MSG_BUS are disabled.

In module 10, I don't have any option to activate the camera, as I've seen in some cars. I also don't have module 76.

In module 10-Adaptions-virtual display for park assist, I've set "rearview camera," and the interface doesn't activate either. I don't know what else to try.

Edited 20 July, 202520 Jul by Albertron

As far as i know you need modul 76 to activate it, this modul is for parking assist. I think you need to change setting in adaptation in case of higline camera(not sure tho). I would first check compatibility of camera for your MIB2 unit i know some units don't support camera but in codes you find some elements for enabling it(if it helps your unit is for PQ platform, it is a little different as MIB for MQB, and i think this model was for VW cars as i see red buttons, skoda had green but this shouldn't be problem). example my old unit had code in 5F to turn on camera but the unit it self didn't support it as my reaserch went(same for some other things like vrs boot screen just make system not working properly).

23 minutes ago, Zan said:

Hasta donde sé, necesita Modul 76 para activarlo, este módulo es para asistencia de estacionamiento. Creo que necesita cambiar la configuración en la adaptación en caso de cámara Higline (no estoy seguro de). Primero verificaría la compatibilidad de la cámara para su unidad MIB2. Sé que algunas unidades no admiten la cámara, pero en los códigos encuentras algunos elementos para habilitarla (si ayuda a tu unidad es para la plataforma PQ, es un poco diferente como MIB para MQB, y creo que este modelo fue para los autos VW como veo los botones rojos, Skoda tuvo verde pero esto no es necesario). Ejemplo de mi antigua unidad tenía código en 5F para encender la cámara, pero la unidad que sí no lo admitió como mi Referch fue (lo mismo para otras cosas, como la pantalla de arranque de VRS, solo hace que el sistema no funcione correctamente).

My Skoda doesn't have module 76, and the camera I installed is a Lowline. Activating it on byte 19 of module 5F should be enough, but it doesn't work for me.

I think that for rear camera you need module 76 and enable one thing there, what you enabled on 5F is just that button for camera that doesn't work in your case(as i know).

Try with this link if it would help you, someone had similar problem just on VW which is same.

https://forum.obdeleven.com/thread/2295/module-rear-ops

7 hours ago, Zan said:

I think that for rear camera you need module 76 and enable one thing there, what you enabled on 5F is just that button for camera that doesn't work in your case(as i know).

Try with this link if it would help you, someone had similar problem just on VW which is same.

https://forum.obdeleven.com/thread/2295/module-rear-ops

Yes, I definitely should have an option to activate the camera from module 10 or 76, but unfortunately I don't have the option.

I think my ecu 5ja919475a is not compatible with rear camera.